ADC Trapper Forum

No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum


~~~ Dobbins' Products Catalog ~~~


WCS
(Please support Wildlife Control Supplies, our sponsor for the ADC Page)






Print Thread
Hop To
Page 1 of 2 1 2
How would you seal this metal roof? #3237266
07/22/12 11:29 AM
07/22/12 11:29 AM
Joined: Nov 2009
Posts: 60
Haubstadt, In.
G
G Hanold Offline OP
trapper
G Hanold  Offline OP
trapper
G

Joined: Nov 2009
Posts: 60
Haubstadt, In.
I've been called by a church about the bats they have in the attic. The whole job is pretty straight forward except for their new metal roof. How would you seal up a roof like this and maintain propper ventalation? It does have large round louvard vents in the peaks of the building. It has "bird caps on the ends of the ridges in MOST places, but not all. I'm not a fan of shooting everything full of foam, but may be the only option here. What do you do that doesn't void any warranty for the roof? I have just received the contact info for the installer, but haven't talked to him yet. How do you bid this? (PM's welcome on bidding).

The suggestion I've had so far was to increase my bid by 50% to make up for the call backs that are going to happen.





User formerly known as Hanible.

Trapping &
Removal of
Animal
Pests
Re: How would you seal this metal roof? [Re: G Hanold] #3238652
07/23/12 07:28 AM
07/23/12 07:28 AM
Joined: Jun 2009
Posts: 44
Dayton, OH
trapper4hire Offline
trapper
trapper4hire  Offline
trapper

Joined: Jun 2009
Posts: 44
Dayton, OH
Good luck.


Advanced Wildlife Managememnt
www.daytonwildlifepro.com
Chris O'Banion
NTA Life Member
OSTA Life Member
Re: How would you seal this metal roof? [Re: G Hanold] #3238666
07/23/12 07:56 AM
07/23/12 07:56 AM
Joined: Jan 2010
Posts: 10,801
S/E Mich - N/W Ohio
On a Call Offline
trapper
On a Call  Offline
trapper

Joined: Jan 2010
Posts: 10,801
S/E Mich - N/W Ohio
Not that I know anything, but why not just find the entrances used and work those areas ? I would think the openings you showed have underlayment which would hold bats back ??

Re: How would you seal this metal roof? [Re: G Hanold] #3238689
07/23/12 08:25 AM
07/23/12 08:25 AM
Joined: Nov 2009
Posts: 60
Haubstadt, In.
G
G Hanold Offline OP
trapper
G Hanold  Offline OP
trapper
G

Joined: Nov 2009
Posts: 60
Haubstadt, In.
From inside the attic it appears that the ridge is open from the previous roof and one of the entrances seems to be the gap between the roof and decking along the front of the building. I will have to close any access that the bats have to the ridges. The main access is around the chimney.


User formerly known as Hanible.

Trapping &
Removal of
Animal
Pests
Re: How would you seal this metal roof? [Re: G Hanold] #3239479
07/23/12 05:17 PM
07/23/12 05:17 PM
Joined: Aug 2010
Posts: 7
California
B
Baxter Offline
trapper
Baxter  Offline
trapper
B

Joined: Aug 2010
Posts: 7
California
Can you mud (mortor)it up. That is what would be used on a clay roof.


Aaron

Re: How would you seal this metal roof? [Re: G Hanold] #3239710
07/23/12 07:17 PM
07/23/12 07:17 PM
Joined: Jan 2010
Posts: 10,801
S/E Mich - N/W Ohio
On a Call Offline
trapper
On a Call  Offline
trapper

Joined: Jan 2010
Posts: 10,801
S/E Mich - N/W Ohio
Perhaps a calk of sorts ??

Re: How would you seal this metal roof? [Re: G Hanold] #3239719
07/23/12 07:21 PM
07/23/12 07:21 PM
Joined: Dec 2008
Posts: 2,807
southern Minnesota
BUD25 Offline
trapper
BUD25  Offline
trapper

Joined: Dec 2008
Posts: 2,807
southern Minnesota
get a hold of new unused metal shingles, cut em up to fit the gaps, seal up accordingly.
Ive got a church right now Im bidding and am just figuring in all the time its going to take.


Bud's Nuisance Wildlife Removal LLC
www.budstrapco.com
www.trappinmoles.com
Re: How would you seal this metal roof? [Re: BUD25] #3240132
07/23/12 10:19 PM
07/23/12 10:19 PM
Joined: Nov 2009
Posts: 60
Haubstadt, In.
G
G Hanold Offline OP
trapper
G Hanold  Offline OP
trapper
G

Joined: Nov 2009
Posts: 60
Haubstadt, In.
I talked to the guy who installed the roof this morning. He said there is no way a bat can get in past that roof.


User formerly known as Hanible.

Trapping &
Removal of
Animal
Pests
Re: How would you seal this metal roof? [Re: G Hanold] #3240257
07/23/12 11:03 PM
07/23/12 11:03 PM
Joined: Dec 2008
Posts: 2,807
southern Minnesota
BUD25 Offline
trapper
BUD25  Offline
trapper

Joined: Dec 2008
Posts: 2,807
southern Minnesota
Originally Posted By: G Hanold
I talked to the guy who installed the roof this morning. He said there is no way a bat can get in past that roof.
hes the bat expert.....


Bud's Nuisance Wildlife Removal LLC
www.budstrapco.com
www.trappinmoles.com
Re: How would you seal this metal roof? [Re: BUD25] #3240276
07/23/12 11:11 PM
07/23/12 11:11 PM
Joined: Dec 2006
Posts: 17,548
Rodney,Ohio
SNIPERBBB Offline
trapper
SNIPERBBB  Offline
trapper

Joined: Dec 2006
Posts: 17,548
Rodney,Ohio
Originally Posted By: BUD25
Originally Posted By: G Hanold
I talked to the guy who installed the roof this morning. He said there is no way a bat can get in past that roof.
hes the bat expert.....


Hope he didnt have that in his warranty information.

Re: How would you seal this metal roof? [Re: G Hanold] #3240659
07/24/12 08:31 AM
07/24/12 08:31 AM
Joined: Jun 2012
Posts: 129
Dudley NC
M
Muddawg Offline
trapper
Muddawg  Offline
trapper
M

Joined: Jun 2012
Posts: 129
Dudley NC
That's the first fake terracotta roof I've seen. Metal, molded to look like terracotta, right?

Along with all the other things I've done, I've been a roofer in the past. So, I'm speaking with some experience.

To start with, I see LOTS of problems with the roof itself. Not the least of which is all the exposed nail heads. A couple of problems around the chimney where there are gaps that shouldn't be and it looks like a couple of the tiles are damaged.

The roofer is right to some extent. If the roof had been done correctly, then there would be no bat problem. The problem is, though, it WASN'T done right in the first place.

Caulk and foam and don't worry about the warranty. It's probably not worth any more than that roof is to start with. It just looks to me as if the Church got took on a bad roof job.


Muddawg
Re: How would you seal this metal roof? [Re: G Hanold] #3241833
07/24/12 08:54 PM
07/24/12 08:54 PM
Joined: Nov 2009
Posts: 60
Haubstadt, In.
G
G Hanold Offline OP
trapper
G Hanold  Offline OP
trapper
G

Joined: Nov 2009
Posts: 60
Haubstadt, In.
Yes Muddawg it's a fake terracotta roof. From talking to the contractor, the church bought the roof and then hired him to install it.


User formerly known as Hanible.

Trapping &
Removal of
Animal
Pests
Re: How would you seal this metal roof? [Re: G Hanold] #3241941
07/24/12 09:39 PM
07/24/12 09:39 PM
Joined: Dec 2006
Posts: 3,808
Lower Alabama (Daleville)
L
LAtrapper Offline
"Professor"
LAtrapper  Offline
"Professor"
L

Joined: Dec 2006
Posts: 3,808
Lower Alabama (Daleville)
Have you conducted an evening/early morning inspection to determine the most used exit/entry points? Are there soffit vents to allow air to enter the attic and exit through the “large round louvard vents”? I have never done a job on that type of roofing material. To me, the evening/morning inspection, is one of the most important aspects on jobs similar to this. I often video the inspections to show the client the magnitude of the problem.


Note to self- Engage brain before opening mouth (or hitting the ENTER key/SUBMIT button).

Ron Fry

Re: How would you seal this metal roof? [Re: G Hanold] #3242051
07/24/12 10:21 PM
07/24/12 10:21 PM
Joined: Nov 2009
Posts: 60
Haubstadt, In.
G
G Hanold Offline OP
trapper
G Hanold  Offline OP
trapper
G

Joined: Nov 2009
Posts: 60
Haubstadt, In.
No LA I haven't done an evening/morning inspection yet. From the guano piled in the attic, it appears that they are entering and exiting around the chimney. There is also guano on the front steps derectly under the front edge of the bat proof roof. There are no soffit vents, everything goes through the louvard vents.

You can see where the "tile" is pulled out from the facia (3rd tile from bottom). There is guano under that point.

One of the vents and of some of the roof lines on a newer addition.


Notice, top of chimney is already screened off.



User formerly known as Hanible.

Trapping &
Removal of
Animal
Pests
Re: How would you seal this metal roof? [Re: G Hanold] #3242260
07/25/12 12:20 AM
07/25/12 12:20 AM
Joined: Dec 2006
Posts: 3,808
Lower Alabama (Daleville)
L
LAtrapper Offline
"Professor"
LAtrapper  Offline
"Professor"
L

Joined: Dec 2006
Posts: 3,808
Lower Alabama (Daleville)
Thanks for the reply. I would certainly conduct an evening inspection. In your pictures, I don’t see any staining or guano accumulation around the chimney. It does look like there are many potential entrances into the attic. I couldn’t make any further recommendations without seeing it myself. Possibly other folks can. I have never found bats entering through an open top chimney flue either. I have found them in the chimney chase though. Of course, I have never found a raccoon in a chimney down here either.


Note to self- Engage brain before opening mouth (or hitting the ENTER key/SUBMIT button).

Ron Fry

Re: How would you seal this metal roof? [Re: G Hanold] #3242270
07/25/12 12:42 AM
07/25/12 12:42 AM
Joined: Dec 2006
Posts: 8,243
NWWA/AZ
Vinke Offline
trapper
Vinke  Offline
trapper

Joined: Dec 2006
Posts: 8,243
NWWA/AZ
Quote:
Not the least of which is all the exposed nail heads


Laps and cut pieces are face nailed ...(for most systems of this Type)

Quote:
A couple of problems around the chimney where there are gaps that shouldn't be


Drain areas for the side wall flashing..........
Does look like a crappy job of installation in general though,,,,,

Sometimes it looks like this under the roofing?????
And they do not have to enter from the chimney flash



Slightly used Shoes 4 sale……………
Re: How would you seal this metal roof? [Re: G Hanold] #3242381
07/25/12 07:05 AM
07/25/12 07:05 AM
Joined: Jun 2012
Posts: 129
Dudley NC
M
Muddawg Offline
trapper
Muddawg  Offline
trapper
M

Joined: Jun 2012
Posts: 129
Dudley NC
Vinke,

Sure, there are times when nail heads will show. But they always get covered with silicon or something. If not, then they just rust out and cause a leak.

But take a look at those photos again. They have nails through the end of the tiles to make them lay down. That's like nailing down the bottom of the shingle tab. Again through the side of the capping. If the capping is down right, it shouldn't need nails on the side to hold it in place. And they don't have anything on them.

As far as the gap between the chimney and the roof sheeting, that's actually code here. Any time you have a heat transfer vent through the roof or wall there must be a gap between the vent(in this case the chimney) and any flammable building materials. That's to prevent conducted heat from starting a fire.


Muddawg
Re: How would you seal this metal roof? [Re: LAtrapper] #3242456
07/25/12 08:36 AM
07/25/12 08:36 AM
Joined: Jun 2009
Posts: 44
Dayton, OH
trapper4hire Offline
trapper
trapper4hire  Offline
trapper

Joined: Jun 2009
Posts: 44
Dayton, OH
Originally Posted By: LAtrapper
Thanks for the reply. I would certainly conduct an evening inspection. In your pictures, I don’t see any staining or guano accumulation around the chimney. It does look like there are many potential entrances into the attic. I couldn’t make any further recommendations without seeing it myself. Possibly other folks can. I have never found bats entering through an open top chimney flue either. I have found them in the chimney chase though. Of course, I have never found a raccoon in a chimney down here either.


I agree just because your finding guano accumulations around the chimney inside does not indicate entry, but more likely roosting. I always have best luck determining entry ways based on external guano, if there is guano on the porch i would start there. And I always do an evening bat watch on any type of difficult bat job, sometimes multiple watches. Twice I've seen bats going down an uncovered chimney, both times it was an OLDER unlined chimney (no clay flu, just bricks/rocks and mortor) and the bats were landing on it and climbing down. But Ive never seen them in a modern chimney with a clay or metal flu.


Advanced Wildlife Managememnt
www.daytonwildlifepro.com
Chris O'Banion
NTA Life Member
OSTA Life Member
Re: How would you seal this metal roof? [Re: G Hanold] #3242487
07/25/12 09:03 AM
07/25/12 09:03 AM
Joined: Nov 2009
Posts: 60
Haubstadt, In.
G
G Hanold Offline OP
trapper
G Hanold  Offline OP
trapper
G

Joined: Nov 2009
Posts: 60
Haubstadt, In.
Actually I'm suspecting that they are going through the soffit and the chimney on the underside, but haven't been on the roof to inspect it. I didn't want to walk on a type of roof that I knew nothing about. All I've done so far is an additional inspection, measurements, and took a few pictures. The guano on the steps says that they may be going in that front edge, but don't see any oil stains there.


User formerly known as Hanible.

Trapping &
Removal of
Animal
Pests
Re: How would you seal this metal roof? [Re: G Hanold] #3242493
07/25/12 09:05 AM
07/25/12 09:05 AM
Joined: Dec 2006
Posts: 8,243
NWWA/AZ
Vinke Offline
trapper
Vinke  Offline
trapper

Joined: Dec 2006
Posts: 8,243
NWWA/AZ


This type roof is nothing more then a "pretty" cover to protect the underlayment ,,,just like tile or wood shakes,,,,


Slightly used Shoes 4 sale……………
Page 1 of 2 1 2
Previous Thread
Index
Next Thread




Powered by UBB.threads™ PHP Forum Software 7.7.1