This is my 2nd yr for trapping and I bought a dozen MB 650s. I am trying to level the pans and have run into a problem. The pans are close to level but I wanted to adjust them a little bit more. I put a screwdriver under the back of the pan and bent the pan down on 2 traps. Now when I set the trap it fires immediately and won't stay set. I think I may have bent the rod a little and now the latch is a hair low cussing it to fire right away.

I guess I will try to bend the rod back up and if that doesn't work I may have to buy 2 more rods.

How do the rest of you level the pans on your 650s?

Thanks

You would get more answers on this subject if you go to strictly trapping or wilderness trapping or trapper talk.

Mine came perfect from the manufacturer.