Not a long line skunk trapper but will keep skunks I successfully dispatch without spraying. Thought about putting this fur up. Since I have no skunk stretchers will a coon board work for skunk hides?

Only big skunks fit on coon boards. a small wire coon/fox stretcher will work fine. Just squeeze it into a longer neck and they work fine.

Thank you MT. Have no wire stretchers but do have some fox boards. I'll give them a go on those.

I went through my boards to find the right fit... I have used a Male Fisher board, it worked nicely.

Fox boards can be a little tight in the neck. I have "hybridized" mine to work with both and produce a nice finished product,

I got a really small one I put up on a wire rat strecher

We have similar opinions, I thought skunks looked better on male fisher boards as well. Does anyone make or have a specific size for skunk stretchers?

I bought some labeled SKUNK that are short and fairly wide, like an oversized muskrat board but rarely ever use them. I usually end up putting them on a small coon board or a fox board so I have enough length to pin out the tail. I tan all of mine anyway so not worried about what a buyer might think.

Grey fox board for small skunk, red fox board for mid sized, and smaller raccoon board for the big ones. I believe Fisher and fox are the same board. I'd have to double check.

Pm me for details on dispatch without spraying. At least 95% of the time.

Small fox and Large fisher are the same board, large skunks also fit this board dimension. I use a female (SM) fisher board for my smaller skunks. Board dimensions listed on NAFA site are the same as Fisher/Fox board, but as always not one size fits all.

Spruce