Finally got all set up and am trying my hand at putting up fur. Watched a lot of videos and read a lot on here. I think it’s going alright, the pelt I started with was rolled up and frozen, when I uthawed it the face was pretty dry, but the pelt seems good and the fat is pushing like I think it’s supposed to. Seems like the membrane/fat layer didn’t get started till about half way down, is that normal? The face was to dry to really flesh does that matter? I’ve attached a few pics (hopefully) any advice or thoughts on how it looks?
How do I post a picture from an iPad?

pictures would be helpful. The files can only be a certain size, so try saving them a bit smaller.
what you describe sounds normal.
I am not the best guy giving lot's of advice on this topic, as it is my first year too with putting up my own fur, it's a lot of work and sometimes you can make it harder than it has to be. But it is very rewarding. I do not flesh the face either.
I think we need to remember it's not rocket science what we're trying to do here!

Cheers

What species are you working on?

What kind of critter are you fleshing?

Also, I like to fold the face of all critters inside the hide when freezing. Keeps the face from drying out while in the freezer and while thawing with fan on them. Most if not all faces require little or no fleshing but when they dry out it can cost length on the board and doesn't have a "clean" look.

Coyote, I’m trying to get s few pics posted....

Pictures aren’t the best, had to take a photo of my phone with my iPad to get it to work....

Coyotes generally don't have much forward of the shoulders. I start at the base of the skull and work down, just get a small amount of meat and fat in that area. Split the ears and do face if there are thick areas.

When you roll up fur, you should always roll the head in first so it's buried deep in the fur and it won't dry out much. Your fleshing looks good and it looks like you have a Necker fleshing knife, which is a decent knife, not some of the cheap ones that are out there. You seem to be off to a good start.

in your pic the membrane looks awful dry. did you freeze it fur in or fur out?

as always coon creek outdoors makes some fantastic instructional videos. Links for Skinning, fleshing, and boarding of coyote below.

https://www.youtube.com/watch?v=JdvvJOB32iM
https://www.youtube.com/watch?v=qHfEWmnRGzM
https://www.youtube.com/watch?v=RBnxZA0lhDg

X2. his videos really help with the learning curve.

I froze it fur in. I think it went alright, did get one small hole toward the bottom. Here’s how it looks finished. Hopefully he’ll be fine there till tomorrow, picking up some coyote stretchers from a friend tonight to use and then make my own from his template. I agree on the coon creek videos, those are the ones I’ve watched the most and seem to be the most informative.

Even the best guys make a hole now and then - no big deal - just sew it up.

Looks darned good for your first time!!

Does a guy have to sew up every hole? Or only if they’re bigger than a dime or so?

freeze everything fur out... youll have a much easier time

My mistake Miller, I misspoke, I do freeze them fur out....

In terms of holes depends on where they are on the pelt and how long the hair is. Doesnt take long at all to throw a couple of stitches in a dime size cut if you think it will show. Bigger than a dime you should probably sew them.

Looks like you may want to rehydrate the head some to get it on the board.Make sure you turn it fur out and roll it up and put it in a cool place until you board it.

Gets easier after the first

Well crap, I tore it when flipping fur side out. Fur looks good and hide seems good I think I just let it dry too long. Is this thing worth anything now? First time so I guess it’s bound to happen but I hate ruining em when they’re worth money green. It’s a really long tear and can a guy sew when it’s dry? Wouldn’t it just tear again when I try to turn it inside out again?