Re: 870 Jamming Problem w. picture
[Re: GaTurkeyHunter]
#6498696
03/23/19 10:46 AM
03/23/19 10:46 AM
|
Joined: May 2011
Posts: 864 Michigan
coonlove
trapper
|
trapper
Joined: May 2011
Posts: 864
Michigan
|
Take out the magazine tube end and spring and push the hung up round back out the tube.
"I'm the paterfamilias"
|
|
|
Re: 870 Jamming Problem w. picture
[Re: GaTurkeyHunter]
#6498698
03/23/19 10:48 AM
03/23/19 10:48 AM
|
Joined: Mar 2007
Posts: 2,347 New Mexico
Chamacat
trapper
|
trapper
Joined: Mar 2007
Posts: 2,347
New Mexico
|
Yep..You need to replace all the springs..
I can catch them here...I can catch them ANYWHERE
|
|
|
Re: 870 Jamming Problem w. picture
[Re: GaTurkeyHunter]
#6498700
03/23/19 10:52 AM
03/23/19 10:52 AM
|
Joined: Jan 2007
Posts: 21,055 MN
160user
trapper
|
trapper
Joined: Jan 2007
Posts: 21,055
MN
|
Typically when they double feed it is a cartridge stop issue. Either use a small screwdriver to push the lower round back into the tube or pull the barrel. About a 1 minute fix.
I have nothing clever to put here.
|
|
|
Re: 870 Jamming Problem w. picture
[Re: GaTurkeyHunter]
#6498710
03/23/19 11:06 AM
03/23/19 11:06 AM
|
Joined: Oct 2011
Posts: 248 East Central Georgia
canecutter
trapper
|
trapper
Joined: Oct 2011
Posts: 248
East Central Georgia
|
I tote the same gun shooten 31/2 " buckshot running deer dogs . When you unload it shuck it as fast as you can . 31/2`s dont like slow motion 3" and down not a problem . Hope this help`s ya .
One More Dozen Want Hurt a thing
|
|
|
Re: 870 Jamming Problem w. picture
[Re: GaTurkeyHunter]
#6498715
03/23/19 11:14 AM
03/23/19 11:14 AM
|
Joined: May 2012
Posts: 450 Hot Springs SD
Larry Bowden
trapper
|
trapper
Joined: May 2012
Posts: 450
Hot Springs SD
|
Ejector problem. Extractor worked and held onto the shell for removal from the chamber. Ejector did not do its job of ejecting the shell from the receiver. Could be weak or broken.
Western SD Fur Harvesters life member, SDTA, NTA, and life member of NRA. Cancer survivor (9 years) and still fighting it.
|
|
|
Re: 870 Jamming Problem w. picture
[Re: canecutter]
#6498725
03/23/19 11:27 AM
03/23/19 11:27 AM
|
Joined: May 2010
Posts: 28,978 potter co. p.a.
pcr2
"Twerker"
|
"Twerker"
Joined: May 2010
Posts: 28,978
potter co. p.a.
|
I tote the same gun shooten 31/2 " buckshot running deer dogs . When you unload it shuck it as fast as you can . 31/2`s dont like slow motion 3" and down not a problem . Hope this help`s ya .
i'd try jackin a few rounds through it with some umph before tearin too much apart.have shot 760's since i was a kid and find you have to do the same with them. let us know what you figure out.please.
|
|
|
Re: 870 Jamming Problem w. picture
[Re: GaTurkeyHunter]
#6498727
03/23/19 11:28 AM
03/23/19 11:28 AM
|
Joined: Dec 2018
Posts: 173 Buggs Island, Va
lonewolf308
trapper
|
trapper
Joined: Dec 2018
Posts: 173
Buggs Island, Va
|
I think the ejection speed might be a problem like cancutter said, you can't hesitate on a pump. If not either ammo or ejector
VTA member
|
|
|
Re: 870 Jamming Problem w. picture
[Re: GaTurkeyHunter]
#6498744
03/23/19 11:52 AM
03/23/19 11:52 AM
|
Joined: Feb 2019
Posts: 1,561 Saucier, Mississippi Harrison ...
turkn8rtrapper
trapper
|
trapper
Joined: Feb 2019
Posts: 1,561
Saucier, Mississippi Harrison ...
|
If the bottom shell was in the feed before the ejection happened the it would be the stop First tear it down and give it a GOOD cleaning. If that didn't happen still tear it down and give it a GOOD cleaning. If it still does it it is the ejector or ejector spring. If you aren't familiar with disassembly of the bolt take it to a gunsmith. Remingtons are famous for these kind of issues when dirty. I should know I own about 20 of their shotguns and several are 3 1/2s.
"Skin that smokewagon and see what happens"
|
|
|
Re: 870 Jamming Problem w. picture
[Re: GaTurkeyHunter]
#6498753
03/23/19 12:04 PM
03/23/19 12:04 PM
|
Joined: Dec 2018
Posts: 5,214 Crivitz WI
Sprung & Rusty
trapper
|
trapper
Joined: Dec 2018
Posts: 5,214
Crivitz WI
|
I have only had that happen when I did a slow ejection so I could just grab the she'll from the action and not let the shell hit the ground. With normal operation it's never happened to me.
No Jab.
|
|
|
Re: 870 Jamming Problem w. picture
[Re: white17]
#6498772
03/23/19 12:44 PM
03/23/19 12:44 PM
|
Joined: Jun 2007
Posts: 303 pennsylvania
eagerbeaver
trapper
|
trapper
Joined: Jun 2007
Posts: 303
pennsylvania
|
can you push the lower shell forward ..back towards the magazine?? Maybe use 3 inch instead of 3.5" if that problem continues. Better yet..........buy a Beretta Benelli
HMS Lures
|
|
|
|
|