Re: Mechanical Help
[Re: white17]
#6882958
05/26/20 08:09 PM
05/26/20 08:09 PM
|
Joined: Dec 2006
Posts: 29,912 williamsburg ks
danny clifton
"Grumpy Old Man"
|
"Grumpy Old Man"
Joined: Dec 2006
Posts: 29,912
williamsburg ks
|
I just got done putting together a toyota 4 cylinder with dual overhead cams over the weekend. No rocker arms the cams sit right on the lifters on top the valves. But the bolts are probably the same size for the caps on the cam bearings. Very close any way. The bolts took a 10mm socket. My chilton manual listed the torque at 17 foot pounds
Those who would give up essential liberty, to purchase a little temporary safety, deserve neither liberty nor safety. Benjamin Franklin (1706-1790)
|
|
|
Re: Mechanical Help
[Re: Jonnytrapper]
#6882976
05/26/20 08:23 PM
05/26/20 08:23 PM
|
Joined: Mar 2007
Posts: 35,182 McGrath, AK
white17
OP
"General (Mr.Sunshine) Washington"
|
OP
"General (Mr.Sunshine) Washington"
Joined: Mar 2007
Posts: 35,182
McGrath, AK
|
Google tells me "37-41 N-m or 27-30 ft-lbs, per the FSM page EM-18" for KA24E Rocker Shaft Torque Specs That's about what I figured it should be. I just don't want to twist one off !! Thanks
Mean As Nails
|
|
|
Re: Mechanical Help
[Re: white17]
#6883022
05/26/20 09:08 PM
05/26/20 09:08 PM
|
Joined: Dec 2006
Posts: 11,940 Oakland, MS
Drifter
trapper
|
trapper
Joined: Dec 2006
Posts: 11,940
Oakland, MS
|
torque chartHere ya go has about all will need.
Some individuals use statistics as a drunk man uses lamp-posts — for support rather than for illumination.
Andrew Lang (1844-1912) Scottish poet, novelist and literary critic
Life member NTA , and GA Trappers assoc .
|
|
|
Re: Mechanical Help
[Re: white17]
#6883194
05/27/20 05:53 AM
05/27/20 05:53 AM
|
Joined: Dec 2006
Posts: 29,912 williamsburg ks
danny clifton
"Grumpy Old Man"
|
"Grumpy Old Man"
Joined: Dec 2006
Posts: 29,912
williamsburg ks
|
Well I tried. Converting foreign measurements to standard has never been my strong suit. I'm glad I mentioned what size socket the bolts took.
Those who would give up essential liberty, to purchase a little temporary safety, deserve neither liberty nor safety. Benjamin Franklin (1706-1790)
|
|
|
Re: Mechanical Help
[Re: white17]
#6883605
05/27/20 06:20 PM
05/27/20 06:20 PM
|
Joined: Dec 2006
Posts: 11,940 Oakland, MS
Drifter
trapper
|
trapper
Joined: Dec 2006
Posts: 11,940
Oakland, MS
|
Some of my manuals I had the bolt torques were listed in the front of the book. They listed them by size and not where they were used. 13 MM head I am guessing is about a 8 MM bolt. I am guessing to end up with around 25 ft/lbs wet threads. No oil in the hole as have seen a bolt push the back of a hole on Deutz before.
Some individuals use statistics as a drunk man uses lamp-posts — for support rather than for illumination.
Andrew Lang (1844-1912) Scottish poet, novelist and literary critic
Life member NTA , and GA Trappers assoc .
|
|
|
|
|