|
Re: Machinists: Cost of 2 inch diameter M42
[Re: Canvasback2]
#6953723
08/04/20 10:29 AM
08/04/20 10:29 AM
|
Joined: Jan 2014
Posts: 1,384 kentucky
logger coffey
trapper
|
trapper
Joined: Jan 2014
Posts: 1,384
kentucky
|
No , but that big of a piece of Hss is gona be costly. You might contact Griggs Metals. sorry i reread your probably wanting cobalt. a 1x1x7 on msc is over 300 dollars
Last edited by logger coffey; 08/04/20 10:39 AM.
|
|
|
Re: Machinists: Cost of 2 inch diameter M42
[Re: Canvasback2]
#6953816
08/04/20 12:13 PM
08/04/20 12:13 PM
|
Joined: Apr 2008
Posts: 3,177 Albany, NY
bobsheedy
trapper
|
trapper
Joined: Apr 2008
Posts: 3,177
Albany, NY
|
McMaster-Carr m42 1"x1"x7" $135.
Try Key Metals
Call Crucible Steel in Syracuse (Solvay)
Last edited by bobsheedy; 08/04/20 12:46 PM.
|
|
|
Re: Machinists: Cost of 2 inch diameter M42
[Re: Canvasback2]
#6954862
08/05/20 09:35 AM
08/05/20 09:35 AM
|
Joined: Jan 2013
Posts: 3,103 7mtns of CENTRAL PA
GROUSEWIT
trapper
|
trapper
Joined: Jan 2013
Posts: 3,103
7mtns of CENTRAL PA
|
Used to handle 10 ft bars of that stuff in the 70's. Place I worked made end mills out of it!! Never realized it was that expensive!!
NRALIFER,PRPA LIFER,HUNTER,FURTAKER
|
|
|
Re: Machinists: Cost of 2 inch diameter M42
[Re: The hammer]
#6954915
08/05/20 10:19 AM
08/05/20 10:19 AM
|
Joined: Jan 2013
Posts: 3,103 7mtns of CENTRAL PA
GROUSEWIT
trapper
|
trapper
Joined: Jan 2013
Posts: 3,103
7mtns of CENTRAL PA
|
Yeah pretty pricey stuff that's why some times its hard to keep my kewl when one of my operators explodes a end mill due to ignorance. I'm sure he could find a lower price but none the less going to cost alot. Cheaper and softer stuff (higher carbon content and easier to machine) was called M2 if my memory is still workin(45yrs ago)
NRALIFER,PRPA LIFER,HUNTER,FURTAKER
|
|
|
|
|
|