Thanks for link on matrres ADC it save me $35, I pic on spot mattress, where got hot an burnt melt liner on mattress. An ooze water a lil unless residue water. But I think small leak an glue patch till drain, but if leak, replace bfore new heater, try Pat h liner an move another spit az decent liner an sav $30 but new mattress from link for sure

Glad you got it figured out, Dave.

You're welcome.

Do me a favor , trust me and try hooking up your hose to it like I mentioned and run the hose down hill, get it straight as you can, no kinks. Suck on the hose hard and long 4-5 times and lay the end down fast. I'll bet it starts running out if you do this once or twice, even if it were a 100' hose. It'll be empty in an hour or two easy. I have done it many times. You don't need a pump, save that money for the Colorado.

I can run it down hill a little. But some places up hill because curve in hose. Some links straighten out a little. I can't see how could go as straight a n up little an run hose down, I try it an take pump back if works but with those I got 75-100 long an not all down hill , not sure. I plan on drain Friday, afternoon ,the new mattress well take up 2 weeks to come. Nor sure until drain an inspect liner if save. Can buy it $30 at store, hopefully save it. Lot other stuff spend money on, another gun maybe. Guns an ammo are hard get deals on, would like get 22 blaze, model made by mossberg

It'll work once you get it running. You got nothing to lose money -wise by giving it a try. If you have a basement with a floor drain, run it down there. I've done that before as well. You could even run it into a sump pump and let it pump it outside.

I try siphon downhill with new shorter 50 ft hose, it finally came after while but very slow feeble. Hook new drill pump to it, the other defective. This one didn't leak water,an ran drill off an on, 2/3 water out bfore work, got new mattress for $50, but as much hassale they are. I buy new liner for $30, not chance old one small hole, hold lot water, not easy drain, the best method would be blow $$ on transfer pump, well see after work if water still come out slow with no pump action , awful hard on drill, let run 2 minutes, stop a couple an run, wear out drill

Dang, coonman would it be cheaper and less trouble just to get a regular mattress ?

I don't know. Mattress an beds are expensive

Got mattress liner out an drain all nite, the old heater short out where plug into heating pad under liner an burnt the start of hole into plywood, burnt black an charcoal, how safe are these ? I get liner today, an have new mattress an heater, if ever short out again, plug into ac outlet. Would all water pour on it stop short out possible electrical fire ? I hope new heater works, go be unhappy tommorow if fill 180 gallons water an heater underneath, new Walmart don't work, Walmart stuff cheap trash , hopefully mattress good, package was rip open at post office, go to store an spend more money may been better.

The plot thickens.