|
Re: Hey gunsmiths
[Re: AKAjust]
#7144024
01/19/21 12:14 AM
01/19/21 12:14 AM
|
Joined: Oct 2015
Posts: 3,067 Wyoming
cmcf
trapper
|
trapper
Joined: Oct 2015
Posts: 3,067
Wyoming
|
The sear spring puts pressure on the sear to engage with the notch on the hammer or striker or trigger depending on the system. Some systems don’t have a sear, for example a 94 Winchester just has a hammer and trigger with their respective spring the hammer mainspring pushes the hammer forward the trigger spring pushes the bottom of the trigger forward and the top towards the bottom of the hammer where it engages the notch in the hammer when it is pulled back. There is a disconnector of sorts that prevents the trigger from being pulled unless the lever is fully closed (in battery) that’s the little button sticking down out of lower tang just behind the trigger bow. In trap terminology the dog would be the sear the pan is the trigger and the jaw is the hammer.
“The world is governed by very different personages from what is imagined” B. Disraeli
|
|
|
Re: Hey gunsmiths
[Re: AKAjust]
#7144033
01/19/21 12:22 AM
01/19/21 12:22 AM
|
Joined: Oct 2015
Posts: 3,067 Wyoming
cmcf
trapper
|
trapper
Joined: Oct 2015
Posts: 3,067
Wyoming
|
To answer your question the trigger spring is the primary resistance of trigger pull but the sear, and hammer notch engagement or sear, striker engagement all contribute to total trigger pull.
“The world is governed by very different personages from what is imagined” B. Disraeli
|
|
|
Re: Hey gunsmiths
[Re: AKAjust]
#7144554
01/19/21 12:06 PM
01/19/21 12:06 PM
|
Joined: Mar 2014
Posts: 2,014 SE Iowa USA
AKAjust
OP
trapper
|
OP
trapper
Joined: Mar 2014
Posts: 2,014
SE Iowa USA
|
He was just to prep it for a scope. Now when you close the bolt it fires, unless you physicaly push the trigger back to its ready to fire position. just
Last edited by AKAjust; 01/19/21 12:11 PM.
|
|
|
|
|
|