No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter
I'm looking to Possibly build me a AR. Any Info on the Best Parts to Buy. I Know there are different Lowers looking for what everyone recommends. Thanks for any and all info!! Glenn
Life Member OSTA,NTA,NRA,NAHC Remember take a kid trapping
You don’t need to over spend on an upper and lower, there all very similar unless you want fancy tooling or engravings. I’ve had great results with Anderson upper and lowers. The parts you don’t want to be cheap on are the barrel and the bolt carrier group, that’s your main operation!
and a set of roll pin punches , a deck of playing cards , some painters tape a small hammer and a magazine type vice block although you can cut your own from a block of wood
America only has one issue, we have a Responsibility crisis and everything else stems from it.
I like the Anderson and Aeropricision parts, Wilson combats makes awesome barrels, built a 204 upper with one of their barrels. Free floating barrels are accurate, get yourself one of the slim profile hand guards. 18-20 barrel would be the nicer ones
Thanks for all the Info Guys. I have been kicking this around for long time. Friends have told me you can build cheaper and better for the $$ then you would spend. Looking into all options. The Gun is proably be the cheapest thing. Ammo whole another ball park.LOL.
Life Member OSTA,NTA,NRA,NAHC Remember take a kid trapping
there is a tax on complete rifles that doesn't exist on build your own
you could last year buy an complete upper a complete lower and take 2 seconds to pop them together as long as they were not purchased as a complete gun it could save you 50 dollars or so just in that.
the real question Did you pull the trigger and buy parts , er-not ?
America only has one issue, we have a Responsibility crisis and everything else stems from it.