Re: Gun kits with no serial number???
[Re: Gary Benson]
#7239265
04/09/21 05:12 PM
04/09/21 05:12 PM
|
Joined: Feb 2019
Posts: 1,553 Saucier, Mississippi Harrison ...
turkn8rtrapper
trapper
|
trapper
Joined: Feb 2019
Posts: 1,553
Saucier, Mississippi Harrison ...
|
After some research Danny you are correct. I stand corrected. I would have never realized they were so available and didn't need a serial number of any kind. It is good and bad as I didn't know the subject matter very well but now I'll have to buy a dozen.
"Skin that smokewagon and see what happens"
|
|
|
Re: Gun kits with no serial number???
[Re: Gary Benson]
#7239415
04/09/21 08:45 PM
04/09/21 08:45 PM
|
Joined: Jun 2007
Posts: 16,150 Tennessee
Scuba1
"color blind Kraut"
|
"color blind Kraut"
Joined: Jun 2007
Posts: 16,150
Tennessee
|
Good luck finding any 80% lowers at the moment. I been looking for a while now with no luck
Let's go Brandon
"Shall not comply" with morons who don't understand "shall not infringe."
|
|
|
Re: Gun kits with no serial number???
[Re: Gary Benson]
#7239470
04/09/21 09:48 PM
04/09/21 09:48 PM
|
Joined: Aug 2011
Posts: 1,601 Ohio
newtoga
trapper
|
trapper
Joined: Aug 2011
Posts: 1,601
Ohio
|
You can mill out a lower with a router. A friend told me that.:)
lifetime member NTA, OSTA, GTA
|
|
|
Re: Gun kits with no serial number???
[Re: Scuba1]
#7239553
04/09/21 10:46 PM
04/09/21 10:46 PM
|
Joined: Sep 2013
Posts: 4,846 Nevada
nvwrangler
trapper
|
trapper
Joined: Sep 2013
Posts: 4,846
Nevada
|
Good luck finding any 80% lowers at the moment. I been looking for a while now with no luck Have you ever messed with the polymer lowers? Like Tennessee arms ?
|
|
|
Re: Gun kits with no serial number???
[Re: Ridge Runner1960]
#7239574
04/09/21 11:01 PM
04/09/21 11:01 PM
|
Joined: May 2010
Posts: 10,485 MN
Steven 49er
trapper
|
trapper
Joined: May 2010
Posts: 10,485
MN
|
Good luck finding any 80% lowers at the moment. I been looking for a while now with no luck They were out there but who knows after the announcement. if you know what your doing, you can put an AR lower together in 20 minutes, how long does it take to put a lower in a jig, drill 2 holes and slap an upper on it? but my opinion is its none of the governments business, you do not need a serial number if you never sell it! Technically you can sell a complete gun built with an 80 percent lower.
"Inflation is always and everywhere a monetary phenomenon". Milton Friedman.
|
|
|
Re: Gun kits with no serial number???
[Re: Gary Benson]
#7239586
04/09/21 11:20 PM
04/09/21 11:20 PM
|
Joined: Sep 2013
Posts: 18,598 Green County Wisconsin
GREENCOUNTYPETE
trapper
|
trapper
Joined: Sep 2013
Posts: 18,598
Green County Wisconsin
|
the router method works , it is slow , plan an afternoon , make small passes , use the 80% lowers jig
clean it out after every pass with a vacuum or compressed air
with the jig the router uses a bushing that rides the jig without damaging the jig
you get a satisfactory part in a couple hours
milling them the set up if your trying to get a good product is most of the work , the end mill used is rather ingenious , but an odd size
if you made a jig to hold the lower and made a zero point off of that , you could probably speed it up some , in machining figuring out how to hold something strait and true is the hard part
the level if finish is a lot of what takes more time
an hour might be if you had done a bunch of them or if you had a jig built for the mill.
America only has one issue, we have a Responsibility crisis and everything else stems from it.
|
|
|
Re: Gun kits with no serial number???
[Re: nvwrangler]
#7240346
04/10/21 08:44 PM
04/10/21 08:44 PM
|
Joined: Dec 2006
Posts: 17,800 N.W. Iowa
Tactical.20
trapper
|
trapper
Joined: Dec 2006
Posts: 17,800
N.W. Iowa
|
Good luck finding any 80% lowers at the moment. I been looking for a while now with no luck Have you ever messed with the polymer lowers? Like Tennessee arms ? Get the lower with carbon in it
|
|
|
|
|