Re: Sifters
[Re: AuthorTrapper]
#7239941
04/10/21 12:34 PM
04/10/21 12:34 PM
|
Joined: Dec 2006
Posts: 23,851 Wisconsin
The Beav
trapper
|
trapper
Joined: Dec 2006
Posts: 23,851
Wisconsin
|
Get a cake pan cut out the bottom. Leave about 1/2 on all edges then just pop rivet some 1/4" screen In the bottom.
The forum Know It All according to Muskrat
|
|
|
Re: Sifters
[Re: Skrak]
#7239982
04/10/21 01:06 PM
04/10/21 01:06 PM
|
Joined: Feb 2015
Posts: 6,004 alabama
steeltraps
trapper
|
trapper
Joined: Feb 2015
Posts: 6,004
alabama
|
Can you please explain how you use the sifter?
I Sure. Dig hole. Bed the trap. The dirt you have dug from the ground goes in the sift. Then you shake the sifter over the trap covering it with dirt and level it off. And wait for animal to step on trap
|
|
|
Re: Sifters
[Re: steeltraps]
#7240092
04/10/21 02:59 PM
04/10/21 02:59 PM
|
Joined: Mar 2018
Posts: 1,409 Central/Western Texas
AuthorTrapper
OP
trapper
|
OP
trapper
Joined: Mar 2018
Posts: 1,409
Central/Western Texas
|
Sorry. But their is NO way I would buy that sifter of his for 20 dollars. When I could get one from Josh on here for 29 dollars Here are some pics Do many rocks or debris get through? Is it stainless or aluminum?
|
|
|
Re: Sifters
[Re: AuthorTrapper]
#7240125
04/10/21 03:45 PM
04/10/21 03:45 PM
|
Joined: Feb 2015
Posts: 6,004 alabama
steeltraps
trapper
|
trapper
Joined: Feb 2015
Posts: 6,004
alabama
|
Sorry. But their is NO way I would buy that sifter of his for 20 dollars. When I could get one from Josh on here for 29 dollars Here are some pics Do many rocks or debris get through? Is it stainless or aluminum? Nope to small . If it did. Would be under 1/4 in diameter. Its very strong = So my quess would be = Stainless then TiG welded aluminum screen inside? Check out his web site I think he has Facebook . I am not in to or ON facebook so I dont know But check it out, bet you will like it!
|
|
|
Re: Sifters
[Re: AuthorTrapper]
#7240213
04/10/21 05:38 PM
04/10/21 05:38 PM
|
Joined: Dec 2010
Posts: 1,684 Wisconsin
Green Bay
trapper
|
trapper
Joined: Dec 2010
Posts: 1,684
Wisconsin
|
I thought Josh was getting out of the business last I heard. Too much work to do both trapping mods and custom welding.
Author of The Lure Hunter: A Guide to Finding Fishing Lures
|
|
|
Re: Sifters
[Re: AuthorTrapper]
#7240394
04/10/21 10:17 PM
04/10/21 10:17 PM
|
Joined: Aug 2013
Posts: 1,566 SE Minnesota
dustytinner
trapper
|
trapper
Joined: Aug 2013
Posts: 1,566
SE Minnesota
|
If any of you have priced metal lately you would know that it has quadrupled in the last month. There is a minimum of 20 minutes labor in that if building multiple ones plus materials. Perforated aluminum is expensive even if prices are normal. So for $42 see if your local welding shop can build you one.
Life member Minnesota Trappers Association FTA,Sportsmen's Alliance
|
|
|
Re: Sifters
[Re: AuthorTrapper]
#7240401
04/10/21 10:33 PM
04/10/21 10:33 PM
|
Joined: Dec 2010
Posts: 34,913 Central, SD
Law Dog
trapper
|
trapper
Joined: Dec 2010
Posts: 34,913
Central, SD
|
Minn trap has a cheaper sifter that comes in diamond screen or square holes that gets the job done.
Was born in a Big City Will die in the Country OK with that!
Jerry Herbst
|
|
|
|
|