No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting~The Pen and Quill

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum~ Fermenter's Forum


~~~ Dobbins' Products Catalog ~~~


Minnesota Trapline Products
Please support our sponsor for the Trappers Talk Page - Minnesota Trapline Products


Print Thread
Hop To
A Pilgrimage to the Mecca of boat parts #7252429
04/26/21 08:56 PM
04/26/21 08:56 PM
Joined: Sep 2013
Posts: 18,561
Green County Wisconsin
G
GREENCOUNTYPETE Offline OP
trapper
GREENCOUNTYPETE  Offline OP
trapper
G

Joined: Sep 2013
Posts: 18,561
Green County Wisconsin
Visited Kendor Marine in Franklin WI to day

I should have taken pictures but I was busy counting hardware into little brown bags and labeling it making my pile on the counter

It is the boat stuff store

from glass and resin to hardware , to railing , gauges , electronics , batteries if you can put it in or on a boat or need it to build or repair a boat they seem to have it well not outboards.

I picked up the Resin , rivets , cleats , rod holders , paint , primer , horn , seals .

lots and lots of little brown bags with stainless screws and assorted hardware.

I think the only thing left is plywood and labor to finish the boat


America only has one issue, we have a Responsibility crisis and everything else stems from it.
Re: A Pilgrimage to the Mecca of boat parts [Re: GREENCOUNTYPETE] #7252436
04/26/21 09:03 PM
04/26/21 09:03 PM
Joined: Dec 2009
Posts: 20,337
The Hill Country of Texas
Leftlane Offline
"HOSS"
Leftlane  Offline
"HOSS"

Joined: Dec 2009
Posts: 20,337
The Hill Country of Texas
Originally Posted by GREENCOUNTYPETE
.
I think the only thing left is plywood and labor to finish the boat


Sounds like you scored big but if you can afford plywood right now Ima say you are prolly trafficin for one of the cartels


“What’s good for me may not be good for the weak minded.”
Captain Gus McCrae- Texas Rangers


Re: A Pilgrimage to the Mecca of boat parts [Re: Leftlane] #7252474
04/26/21 09:25 PM
04/26/21 09:25 PM
Joined: Sep 2013
Posts: 18,561
Green County Wisconsin
G
GREENCOUNTYPETE Offline OP
trapper
GREENCOUNTYPETE  Offline OP
trapper
G

Joined: Sep 2013
Posts: 18,561
Green County Wisconsin
Originally Posted by Leftlane
Originally Posted by GREENCOUNTYPETE
.
I think the only thing left is plywood and labor to finish the boat


Sounds like you scored big but if you can afford plywood right now Ima say you are prolly trafficin for one of the cartels


2 maybe 3 sheets I found some for 50 a sheet.

I had gone to buy a boat with 1600 in hand in Dec that deal feel through I wasn't fast enough , ended up buying a 400 dollar boat from my supervisor that needed a new floor and tires but had a good motor and hull I should still be under budget which is good because I might have dropped 400 on poles , reels and tackle last weekend.

my wife is very understanding there are 4 fishing poles in my dining room right now and that is a fairly normal number

we do try and keep it to just one gun in pieces on the dining room table at a time.

Last edited by GREENCOUNTYPETE; 04/26/21 09:26 PM.

America only has one issue, we have a Responsibility crisis and everything else stems from it.
Re: A Pilgrimage to the Mecca of boat parts [Re: GREENCOUNTYPETE] #7255534
04/30/21 11:27 PM
04/30/21 11:27 PM
Joined: Dec 2009
Posts: 20,337
The Hill Country of Texas
Leftlane Offline
"HOSS"
Leftlane  Offline
"HOSS"

Joined: Dec 2009
Posts: 20,337
The Hill Country of Texas
Rob gives us before and after pictures
Just sayin...


“What’s good for me may not be good for the weak minded.”
Captain Gus McCrae- Texas Rangers


Previous Thread
Index
Next Thread