No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter
I'm getting ready to set up a horizontal skinning machine, for the guys that have them what is the best height to mount it at, anyone with pictures, tips? Thanks
I built a few back when I sold skinning machines. Most people want the animal around 32-36" off the floor for standing to skin, adjust for your own body height.
Personally if room height is the concern I'd choose a roller style skinning machine. A&J Skinning Machines sells a nice one I designed many years ago. They have since taken over building my designs with my permission and initial guidance.
With this style if you run out of pulling height, you just lower the critter and roll up more hide then continue the pull. If I had to start over with a new skinner this is the style I'd choose.
I had a horizontal set up, not electric---because of my back problems. But I had no table under it, it worked for me, I could spin them around as the bucket(weighted heavy) pulled them across. Dont use it anymore as I dont do large numbers of critters anymore.......jk
Free people are not equal. Equal people are not free. What's supposed to be ain't always is. Hopper Hunter
Uni strut no weld design. Skinned this way after my shoulder surgery. I agree with ADC. If yotes ever shine again I’ll go with a roller set up. Two 12’ 2x12 boards.
The first fur dealer I went to 55 years ago , had one , never seen him use it. I would skin my fur there, and help skin some of his. Just seemed to be odd to me and not like a vertical skinner , that you can turn the carcass around to cut if you needed to on the back side. Never used it, and never seen him use it, he just told me what it was , but never asked if I wanted to try it. I didn't like it , but never tried it either .
I don't know what to tell you. You must be doing something wrong. Are you pulling down on the tail as the machine pulls the coyote up? If you're not, that is your mistake.
I don't know what to tell you. You must be doing something wrong. Are you pulling down on the tail as the machine pulls the coyote up? If you're not, that is your mistake.
I'll try that, it was my first year with a puller, I think two female ripped.
So as it starts to pull skin down, I hold the tail up so it pulls easier?
I didn't have the horizontal or vertical room, so I ran mine at an angle. I also started flipping the animal (fur up and carcass down) to eliminate blood issues.
I don't know what to tell you. You must be doing something wrong. Are you pulling down on the tail as the machine pulls the coyote up? If you're not, that is your mistake.
I'll try that, it was my first year with a puller, I think two female ripped.
So as it starts to pull skin down, I hold the tail up so it pulls easier?
Note the times that he pulls down on the hide to help. This prevents tearing. Also cut off the front legs just above the elbow before you start. Warmer coyotes are easier but it still works for cold ones.