Home

Reloading Question

Posted By: huntcook

Reloading Question - 10/26/20 01:59 PM

I have a Ruger Redhawk in a 480 I would like to take a deer with it this season it was very hard to find bullets for it. I finally found some 275 gr bullet but only one of my reloading books has a powder charge for it and I have none of the powder listed. Is there any place on the internet I can go to that will show a charge for that grain bullet?
Posted By: the Blak Spot

Re: Reloading Question - 10/26/20 02:08 PM

Usually some of the powder companies have loads listed on their websites. Alliant does pretty sure
Posted By: robert.d12

Re: Reloading Question - 10/26/20 02:09 PM

Hodgden or however you spell it gives that info on their website as well.
Posted By: TRAPPER TOM

Re: Reloading Question - 10/26/20 02:10 PM

DID YOU EVEN try searching for it
Posted By: yukon254

Re: Reloading Question - 10/26/20 02:18 PM

Loaddata.com
Posted By: danny clifton

Re: Reloading Question - 10/26/20 02:28 PM

what powder do you have?
Posted By: turkn8rtrapper

Re: Reloading Question - 10/26/20 02:30 PM

Go to vehntevori I'm sure I spelled it wrong but they have a burn rate chart that shows powders that are the same side by side. Very helpful. I copied it and put it in my book as soon as I found it.
Posted By: huntcook

Re: Reloading Question - 10/26/20 02:31 PM

Trapper Tom I google it and got nothing as a power load.
Posted By: huntcook

Re: Reloading Question - 10/26/20 02:49 PM

Danny I have a Hodgdon manual and have H4227,H110,Lilgun,Longshot, they have loads in heavier grain bullets but nothing for the 275 gr bullet only Barnes has a load for 275 bullets and I have not got the power they show.
Posted By: GREENCOUNTYPETE

Re: Reloading Question - 10/26/20 02:56 PM

hodgdon doesn't list a 275gr

http://www.hodgdonreloading.com/data/pistol

Alliant does however http://www.alliantpowder.com/reload...eight=275&shellid=39&bulletid=76

remember Aliant is old style tell you max and you figure out 90% for starting load
[Linked Image]
Posted By: TRAPPER TOM

Re: Reloading Question - 10/26/20 03:04 PM

fair enough
Posted By: traprjohn

Re: Reloading Question - 10/26/20 03:06 PM

personally I'd be asking here: https://www.rugertalk.com/forums/
as well as here:
https://www.handloadersbench.com/
if I the bullet mfg didn't show it
Posted By: danny clifton

Re: Reloading Question - 10/26/20 03:06 PM

https://reloading-data.speer-ammo.c...un/475_caliber_475_dia/480_Ruger_275.pdf
Posted By: danny clifton

Re: Reloading Question - 10/26/20 03:09 PM

Personally I would not substitute Hodgdon powder for IMR data. Looks like that H110 should work though
Posted By: GREENCOUNTYPETE

Re: Reloading Question - 10/26/20 03:10 PM


hard to beat the data from the bullet manufacturer

if you are using the speer 275

[Linked Image]
Posted By: huntcook

Re: Reloading Question - 10/26/20 05:00 PM

Thank for your comments the data posted is very helpful I need to up grade my reloading manuals or quit getting newer calibers.
Posted By: GREENCOUNTYPETE

Re: Reloading Question - 10/26/20 05:18 PM

even the Hornady 10th edition only has 325gr loads for the 480 ruger

Lee started with 325 and went up

things move so fast these days that even Hornady has released a reloading app for 99 cents a cartridge you can download just what you want or 19.99 you get all the data and it includes the hard cover 10th edition also not that it would do much good if it has the identical data to the 10th edition hard cover I have for 480 ruger.
© 2024 Trapperman Forums