Duke 110 chain?

Buddy is getting some trapping items into his archery shop. The Duke 110's he got have chains that have the ends of the links sticking out. Is this common? They can snag clothing, skin, fur...

Just when you thought dukes couldn’t be more poorly made....

I’m a Bridger man have been since my friend rat trap (duke 1.5) cut me with the burs it had on it. Had a terrible duke #2 that would not set properly even after lots of work. Then I have had some good dukes it depends but Bridger has my vote!

call duke an talk with them ,there good people

There was an issue several years ago at a convention where kids were winning traps that had this defect. They all had the same serial batch number.

Cut it off - replace - move on.

Brian

Should the dealer do that, or should he sell them cheap so someone only has the same price in them after buying and replacing the chain?

110 traps should have 2 links left on for a tag, that's it. Doesn't excuse shoddy workmanship.

Pretty poor

Looks like leftovers from their move to Vietnam manufacturing. I cut the chains off 3 dozen and replaced them with cable. No way I was going to hand those sharp chains to a youngster. I would not even attempt to use them myself!

Send em back, Bill will make It right.

Seen same on duke 330's

Wouldnt the postage kill the deal? So Vietnam is where the quality starts to kick in?

QC problem
Call Mr. Duke he will make it right, he’s a honest man.

I remember that post by Muskrat.

I'm sure Duke will cover the postage too. Just give Bill a call.

Yep good man, he'll make it right for you.

Quality issue aside - I cut the chains off all my small bodygrips. A lot fewer tangled messes and headaches