Posted By: cotton
.444 - 06/01/21 01:58 AM
grandson picked one up the other day, wont be long till he comes over wanting me to load ammo for it
single shot so pointed bullets will be ok
whats yalls pet loads???
I never even shot one but my grandkids show up here to load ammo too. I hope that never stops. Its good to be a papa.
Posted By: Scout1
Re: .444 - 06/01/21 02:51 AM
I've got a marlin .444, no dies to reload, and down to 7 rounds left.
Posted By: cotton
Re: .444 - 06/01/21 02:53 AM
I never even shot one but my grandkids show up here to load ammo too. I hope that never stops. Its good to be a papa.
ifin i had knowed they was this much fun, i would have skipped the kids and had the grandkids first
Posted By: yukon254
Re: .444 - 06/01/21 03:26 AM
I've been packing one for years. I finally got my hands on a Ranch Dog mold. My mold drops a bullet that weighs 300 grains when Im finished. The old Hornady 265 grain bullet was a good one, but its discontinued now. Speer's270 grain gold dot also has a good reputation, although Ive never used it. The 444 is one of the most underrated cartridges out there. Its better than the 45/70 in my opinion. Ive taken a lot of game with mine, including grizzly. For powder, R7 is my favorite.
The Hornady rubber tips might be OK for deer, but they dont hold up very well on really big game.
Posted By: cwtrapper
Re: .444 - 06/01/21 03:38 AM
I've had a Marlin 444 for years. Used it as my bay up gun. Also my guide gun. Shooting the Hornady Lever evolution for a few years now. 265 grain. No grizzly around here but will flat stop a black bear.
I have a set of reloading dies for that.
Posted By: Leftlane
Re: .444 - 06/01/21 10:24 AM
I hope when I have grandkids they turn out like yours did Cotton
265 gr. Bullet and upper end of imr 4198.
Posted By: EdP
Re: .444 - 06/01/21 11:15 AM
Hornady 265 gr flat point over 43.5 gr of H4198 in vintage Marlin (Microgroove). Don't know what bullet I will go to after my 265 FPs are used up.
Posted By: beaverfoot
Re: .444 - 06/01/21 12:35 PM
I load my 444 brass with shot and use it in my 410
Posted By: BigBob
Re: .444 - 06/01/21 11:46 PM
Hornady makes, or did, a dandy 300 gr, JHP. Might try fooling around with a .44 Sabot!
Posted By: 3togo
Re: .444 - 06/02/21 01:42 PM
I don't own a .444, but years ago looked into this company for hard cast lead bullets for my Dan Wesson .44 mag.
https://www.beartoothbullets.com/They have many types that also can be used in rifles. If you slug the barrel on your own gun I believe they will even make a mold for whatever cast bullet you would like to use.
Hard cast bullets such as these DO NOT deform when traveling through wet newspaper or tissue.
I’ll check tonight or tomorrow on my load. It’s not a pointed bullet, but a good load.