Nessmucks Trap Tip #2

When you have to replace your broken triggers…you have to drill / grind out the factory rivet….ALWAYS USE A BRASS SCREW AND NUT to replace the rivet. Brass doesn’t rust and will easily come apart …….next time.

I look forward to seeing more of your tips. Last year they sure helped me improve my body grip traps.

Good Advice

If I can add to the topic of replacement wires, Welding supply houses carry stainless steel TIG filler rod which works wonderfully for trigger wire. Won't break the bank either. You can buy as little or as much as you want. They sell it by weight.

Good Stuff

I bought brass nut and screw at the hardware store and found out the screw was only brass plated

if you need it all brass check with a magnet

The brass hardware ain’t cheap….but well worth it

I use brazing rod for replacement trigger wires.

get the brass screws from your trap supply dealer, same ones to use on trap pans, cheap by the hundred and you will find uses for them.

great second tip sir thanks i have some triggers needing replaced.

They are significantly cheaper from the trap dealer as well!

The Beav has deep pockets and money to burn !