Cleaning paint off traps?

I bought a couple dozen dp traps that were heavily painted to the point the dog and spring would not move. I've tried cleaning them with paint thinner, gas, and break fluid as I know all of these can cause the paint to blister. So far nothing has worked. My next option is to throw them in mt cement mixer with a bucket of sand and let it run for a while. Has anyone else used this method to clean traps or have a better option. The paint seems to be latex.

Soak them in acetone for a little while. That will take the paint off.

X2

I know vinegar will take a rusted trap and make it look brand new in a couple of days.

Take one of those hand held torches and burn It off. Just stay away from the spring or just don't linger to long on the spring.

Catch a coon , he will shine it right up

Super clean from Walmart ,soak overnight. Rinse with hose. Works awesome.

Thanks guys. I'll try the acetone or super clean.

^^^^^
This !

Rob is probably right about the super clean, I’ve not tried it. I have used the cement mixer, but you would be better off using sand blasting grit . Black beauty works well for me .

I have boiled some in lye or Sani Flush and it worked but the Super Clean sounds very interesting .If it works,I would choose it every time,over more caustic stuff and especially over acetone.Thanks for the tip guys.

Super clean is amazing stuff. Will degrease new traps in 20- 30 minuets. Will eat paint off over night. I bought a vise for my trailer and it was oily so I threw it in the super clean over night and the next day there wasn’t a speck of paint on it. That’s how I figured it out about paint. Will also remove powder coat but it takes a very long time. I use it straight but the guy who told me about it cuts it with water. 50/50 I think.
I have degreased in super clean, rinsed well , hung fo two days and then waxed new traps. Caught several yotes in those shinny new traps.

Thanks guys I'll hopefully get to it this week. I'll bring some black beauty blasting grit home from work this week along with any other left over blast grit in partial bags I can find just in case I cant get super clean.

What department is Super clean in

Automotive.

Would it be ok to use muratic acid on traps I just bought some

I wouldn't.

Thanks for the tip- I have some problem projects that need a good cleaning!

Update: it took several days in the super clean but it has stripped all the paint off the traps and could be hosed off with the garden hose. Now do I need to neutralize the traps with baking soda and water or are they good to go in the dye pot?

I air them out for a couple days then dye and wax.

I just recently used super clean on a #3bridger and a few 1.5s. Wow. It took the old formula 1 dip right off. Amazing stuff.

Will super clean remove old wax ?

Are you diluting the super clean? What ratio?

Yes to a degree, but it takes way to long. Paint, f1 and oil is where it shines.

Does super clean remove FMG and does it rinse off clean??

I still think burning It off would be faster and cheaper.

TGb it sure does. I would soak a day or two at full strength. Then rinse very good. What isn’t totally gone is a blue goop. It washes right off. Just did 7 dz bridger 3s that had fmj on them. Be sure and really rinse the springs out good.

Ttt

I used Battle Born last month on heavily painted, used traps I purchased.
The paint was so thick, the J-hook swivels wouldn't move and some links of chain were painted fast together.
Battle Born cleaned them shiny clean. I was amazed since this was the first time I used this product. I'd say, 30 minutes in the boil pot and I was rising shiny traps.

https://www.minntrapprod.com/Battle-Born-Trap-Cleaning-Powder/productinfo/BATTLEBORN/

Super clean or purple power if cost is a factor. Both take paint, dips, and if left in long enough will make wax wash off. When washing the traps off helpful tip, if you think you got all the cleaner washed off jeep rinsing haha.