Posted By: Kevin Stake
Victor # 2 - 09/17/19 12:45 AM
Did older Victor # 2 double LS have cast jaws?
Victor # 2
Posted By: wissmiss
Re: Victor # 2 - 09/17/19 02:42 AM
Yes. Most likely made by Oneida Community. Pre 1925. Not a lot of collector value, unless there is something unusual.
Posted By: 160user
Re: Victor # 2 - 09/17/19 06:38 PM
Yes, little things like a spring stamp can make all the difference.
![[Linked Image]](https://trapperman.com/forum/attachments/usergals/2019/09/full-2100-17902-victor_spring.jpg)
Posted By: wissmiss
Re: Victor # 2 - 09/17/19 07:13 PM
Show Off!!!!!!!!!!!!!
Posted By: Kevin Stake
Re: Victor # 2 - 09/17/19 09:07 PM
Thanks. I will look and see if I can find anything tonight.
Posted By: Kevin Stake
Re: Victor # 2 - 09/18/19 01:03 AM
No markings. Thanks for the info.
Posted By: dustytinner
Re: Victor # 2 - 09/20/19 10:56 PM
What does the last word say?
Posted By: snakecollector
Re: Victor # 2 - 09/21/19 04:57 AM
Oneida Community
Victor
Game Trap Spring
Victor
Game Trap Spring
Posted By: dustytinner
Re: Victor # 2 - 09/22/19 02:17 AM
Thanks!
Posted By: backroadsarcher
Re: Victor # 2 - 09/22/19 01:29 PM
Oh now you guys are going to make dig out my old #2's to look them over!
Posted By: 160user
Re: Victor # 2 - 09/23/19 01:57 PM
Originally Posted by backroadsarcher
Oh now you guys are going to make dig out my old #2's to look them over!
Actually I have seen 2 stamped springs, each with slightly different wording. Both were on 1.5 ribbed jaw LS. Digger Dale may have better information than I do.
Posted By: snakecollector
Re: Victor # 2 - 09/23/19 02:11 PM
The stamped Victor springs did not come on any traps. They were sold as replacement springs, so they could be on any trap that the buyer put them on. #1 1/2 and #2 Victors have the same size spring, this is the only size that I have seen with the stamp. The stamping on springs was only done for a very short time.