Hey does anyone have any plans to make your own pole for injecting skunks. Tried to make one today and couldn't find a threaded end to fit the syringe i bought. Any help would be appreciated.
Posted By: traprjohn
Re: skunk pole - 07/08/12 10:51 PM
I used a drink bottle lid on a extendable painters pole.
Posted By: Paul S
Re: skunk pole - 07/08/12 11:49 PM
I made a 5' pole with a threaded cap that holds the syringe.. Only the needle protrudes reducing bent / broken needles. It has a push rod to control the injection...much like P-Skinny's. I guess he took his pics off photobucket.
Posted By: 22mag
Re: skunk pole - 07/09/12 01:34 AM
PaulS, do you have a pic of the threaded cap?
Posted By: 22mag
Re: skunk pole - 07/09/12 02:24 AM
Thanks Paul. With that setup, how do you get only the needle exposed and the syringe stable at the same time?
I am suprised this post is still up. The moderaors must be sleeping. Discuss this stuff through PM's please.
Posted By: Paul S
Re: skunk pole - 07/09/12 11:46 AM
The cap screws onto the threads shown in the 2nd pic...
Posted By: 22mag
Re: skunk pole - 07/09/12 05:25 PM
Got that part-- so theres an inch or two of syringe exposed+the needle?
Posted By: 22mag
Re: skunk pole - 07/09/12 05:29 PM
No, took me forever-- i got it now. Lol