I fixing to grind a bunch of coyote glands. Do yall grind your course first and then fine ? Or just fine right off the bat ? I wanting to age them some not rot.
Posted By: Paul Dobbins
Re: Grinding glands - 06/09/19 06:40 PM
I grind mine once through a fine plate.
Posted By: Bob Jameson
Re: Grinding glands - 06/09/19 08:39 PM
I grind twice typically through 1/8th inch plate. Once is ok but twice gives you a faster break down and allows for a more creamy end result. All depends upon your end result texture as to choice of plates and how many times you grind.
Posted By: Paul Dobbins
Re: Grinding glands - 06/10/19 03:24 AM
I use a 3mm plate, which I think is 1/8, like Bob uses. After the glands rot down for at least 5 years, they're like puddy, and very nice to work with. It may take less time than that, but I like them to be good and stable before I use them. I'm currently using glands from 2008.
Posted By: Night Owl 22
Re: Grinding glands - 06/10/19 02:10 PM
I also grind when semi frozen. Much less binding and hang up on the blade and it keeps the grinder cooler if you are grinding several gallons.
Posted By: ponyboy
Re: Grinding glands - 06/12/19 02:17 PM
Great advice from some seasoned veterans in the lure making world.