Home
Size of fleshing beam
Posted By:
Zeb Johnson
Size of fleshing beam -
07/30/19
04:15 PM
What size fleshing beam is the best all-around size
for coyote, fox, bobcat and racoon
Posted By:
bctomcat
Re: Size of fleshing beam -
07/30/19
04:24 PM
IMO one made out of a 2X6 in the shape of a large NAFA fox board.
Posted By:
Tailhunter
Re: Size of fleshing beam -
07/30/19
11:23 PM
I’ve found this to work great on coon, fox and coyote.
Posted By:
rendezvous
Re: Size of fleshing beam -
07/30/19
11:25 PM
I made a PVC Beam System, it has a 10-1/2", 8", 6" and a 4" beams. But to be honest the 6" beam can get it all done.
Posted By:
PDH
Re: Size of fleshing beam -
08/28/19
01:58 PM
6 or 7 inch is probably the best size.
Posted By:
LDW
Re: Size of fleshing beam -
09/02/19
02:29 AM
6 inch works for everything I do.
Posted By:
GaryD71
Re: Size of fleshing beam -
03/02/21
12:59 AM
I need to build one of these. I just finished my first season and a friend of mine got all my furs. Looks like some good stress relief.
Posted By:
Jim Bethell
Re: Size of fleshing beam -
03/02/21
01:48 PM
Mine is a 2 x 8 which is only 7 1/2 in. wide before shaping. Works well.
© 2024
Trapperman Forums