No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter
im going to be making a skinning machine and was wandering which type you all prefer the roller type or the kind with the clamps made out of vise grips.
this is going to be used mostly on coyotes.
Anyone that owns a gun and votes democrat deserves to have there gun taken, cause they truly are too stupid to own a gun.
Make a slip noose out of 1/8" cable put a fixed loop on one end so you can hook to the skinner mast. Open your coyote place as much of the flank fur Into the noose draw it down attache fixed end to mast and start to pull. If you run out of head room reverse the winch open the noose pull the hide down through the noose re tighten and start pulling again.
This system Is a positive pull with no slipping or tearing.And very simple and cheap. I pull all my coon and coyotes this way.
Last edited by The Beav; 06/18/0910:41 PM.
The forum Know It All according to Muskrat
Re: skinning machine, roller style or clamp style
[Re: The Beav]
#1386233 06/18/0910:44 PM06/18/0910:44 PM
I have clamps and they slip alot or tear hide sometimes. Tried cable this year and that solved those issues but it leaves a mark. Wish I had roller style...
With that said they all beat pulling!
5. Oppose unscientific and inappropriate legislation pertaining to the management of furbearing animals.
if you look in the last pick (Nick C) posted you will see the coon is held in place by (rolling) the hide between two bars and then locking the bars in place.
Anyone that owns a gun and votes democrat deserves to have there gun taken, cause they truly are too stupid to own a gun.
Re: skinning machine, roller style or clamp style
[Re: bluegrassman]
#1387570 06/20/0912:21 AM06/20/0912:21 AM