No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter
Anyone have plans to make one of these? I can't seem to find plans any where. I have a bad skunk problem at my house and would like to make one due to the fact that last time I caught a skunk he spooked and sprayed my door to the basement wood storage and caused the inside of the house to smell for a bout a week.
I don't think these are spray proof, they are just solid to prevent spooking them.
They are, skunk can't raise their tail inside, so they don't spray. Made me a lot of money in ADC work. Can't help with the plans since I bought mine from the Snare shop and MTP.
“A government big enough to give you everything you want, is strong enough to take everything you have.” - Thomas Jefferson
Basically all you need is a triggering system and a door. Don't over think the triggers, all they need to do is hold open the door until the skunk hits the trigger. Here's what I do on cages, let me think on the PVC for a minute, bet I can come up with a simple design for them...
F@T says they are 6" PVC and 24" long. You could cap one end easy then build and bolt on a frame just like the one in my cage video. Use a solid door and just a rod from the pan inside to hold up the door until they step on it or push on the rod. Very simple.
Should get it from MT's post above.
~ADC~
Last edited by ~ADC~; 09/26/1208:09 PM. Reason: too slow monster tom already showed the pics.
Basically all you need is a triggering system and a door. Don't over think the triggers, all they need to do is hold open the door until the skunk hits the trigger. Here's what I do on cages, let me think on the PVC for a minute, bet I can come up with a simple design for them...
To cool! I will definately have an off season project now!
