ADC Trapper Forum

No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum


~~~ Dobbins' Products Catalog ~~~


WCS
(Please support Wildlife Control Supplies, our sponsor for the ADC Page)






Topic Options
Hop to:
#6013791 - 10/01/17 03:54 PM MB 650 Pan Adjustment
377Hotrod377 Offline
trapper

Registered: 01/29/17
Posts: 4
Loc: Somerset Pennsylvania
This is my 2nd yr for trapping and I bought a dozen MB 650s. I am trying to level the pans and have run into a problem. The pans are close to level but I wanted to adjust them a little bit more. I put a screwdriver under the back of the pan and bent the pan down on 2 traps. Now when I set the trap it fires immediately and won't stay set. I think I may have bent the rod a little and now the latch is a hair low cussing it to fire right away.

I guess I will try to bend the rod back up and if that doesn't work I may have to buy 2 more rods.

How do the rest of you level the pans on your 650s?

Thanks

Top
#6013976 - 10/01/17 07:27 PM Re: MB 650 Pan Adjustment [Re: 377Hotrod377]
Kurt in Va Offline
trapper

Registered: 09/29/09
Posts: 41
Loc: Virginia
You would get more answers on this subject if you go to strictly trapping or wilderness trapping or trapper talk.


Edited by Kurt in Va (10/01/17 07:31 PM)

Top
#6015206 - 10/03/17 01:21 AM Re: MB 650 Pan Adjustment [Re: 377Hotrod377]
AJE Offline
trapper

Registered: 01/22/16
Posts: 2328
Loc: WI - Wisconsin
Mine came perfect from the manufacturer.
_________________________
WTA Member

Top