Inupiaq Yes I make my own. Everyone has their own preference on how to make snares, loop size, end stops and so forth. Over the years I have came up with what works for me. I honestly believe that the heights of the bottom of the set snare is key to a good catch. You get them under the chin and they will be there for you, fox, yote, kitty. I do have a occasional kitty jump through the loop or get a hip catch but that seems to happen after we get a good dump of snow and the hieght of the snare isn't were it needs to be.
40 inches of cable attached to 3 ft of 9 or 11 gauge wire with a double ferrule. Makes a nice 10-11 inch loop. For cable I have been using 1/19 or 7x7 3/32. Getting away from 1/16th, yotes love to chew. Every snare that I put out has a BAD, I got to many moose in my area and got tired of doing the moose rodeo. I prefer Slim Loc's, they cut through the hore frost and ice on the snare pretty easy and with the mixed weather I have here they work pretty good.
I have made up a few with the kill springs this year to see how they work out. Once I am done building them I spray paint them and dip them in FMJ. I normally just slip my snares at the tree end of season, especially at bait stations. There are snares out there that are 4-5 years old and still good.
![[Linked Image]](https://trapperman.com/forum/attachments/usergals/2018/12/full-10231-432404-48413134_1916141981816322_1021147037472653312_n.jpg)
When it come to building them...
Take the cable put on a end stop, take a pair of needle nose pliers and bend the cable back oppisite of the natural curve of the cable. Some like a sharp bend others like a loop bend.
I then take the cable, left hand on the button stop put it behind the 2x4 post of my swagging stand, grab the other end and run it left to right going with the natural bend of the cable. The first four inches is where the most pressure should be, it doesn't take much pressure, and if it doesn't create what your looking for run it again a little harder. ADC has a pretty good video and post on how to do it. And your going to waste a little cable until you get it figured out
![[Linked Image]](https://trapperman.com/forum/attachments/usergals/2018/12/full-10231-432409-48407586_131654307737867_1150625041428250624_n.jpg)
As for green belly, I normally run a 3-4 day check, and the only time it seems bad is when I am waiting for a frozen critter to thaw out. Other then that no issues. If they do have green belly, once it is fleshed I rub borax on it, no slippage.