While in Springfield for the NTA convention we spent some time at Bass Pro. This was the weld job on a boat on the showroom floor. All the visible welds on the boat looked like the ones in the picture. My buddy who is a welder walked over and started pointing out pin hole after pin hole. The quality control guy must have been sleeping when this boat went by. It was the pro 160 model pretty bad for a boat that is probably 15k.

Had me scared there for a minute.

I thought, by the title that it might be some of your own work, and you were proud of it.

Having been a professional welder, I just couldn't find it within myself to offer any complements.


So glad my first impression was incorrect, and that you indeed know the difference.


You ought to see some of the welds on new farm machinery. Spend tens of thousands of dollars on a piece of equipment that looks like the turkeys roosted on it.


Charlie

I know nothing of welding but I've spent plenty of time in and around boats and always thought Tracker/Grizzly boats looked like they were put together a committee of idiots.

I havent ever welded before but know it shouldnt look like that.

It was bad, I should have taken more pictures. The next model up was right beside it and its welds looked like what I would expect a boat of that price done by a professional to look like.

I looked at boats this spring at a Bass pro and one of the ones they had on display wasn't built correctly and the motor couldn't turn more then 45 degrees without hitting the transom. Very poor work and to put it on display wow.

There are welders and grinders ... If you are not good at one, ya got to e good at the other.

All welders are not created equally.....all I'm gonna say bout that!

I call them bubble gum welds.My two sons could weld better than that by the time they were 14.

One of my first statements after I saw it, was dont they have a grinder.

It doesn't surprise me at all. Bought a bass pro fishing pole a couple months ago every 3-5 cast the top half of the rod would fly into the lake. 2-3 times the eyelets cut my line. I took it back right away and laughed when they offered to exchange it.

Reminds me of a place I applied to work at.. I had never welded aluminum before, when I tested my weld was ok. I told the guy within a couple days I would make pretty welds. Then he walked me around the shop....... I couldn't believe they were selling trailers. Their customers must be blind.

Dang, that looks like they turned me loose on the welder, and that's bad.

Would that be before a couple of cold ones or after?

Made in America (by Mexicans)

Lol, either one will garner the same results, poor welds and some flash on my neck.

Heres a picture that was done at the shop I work at. Cant remember if he used an actual brazing rod or if it was a coat hanger.

Must be a coat hanger, because at least the brazing rod would make it a gold color.

This........

That is some special chicken scat welding there. Hopefull the customer did not have to pay for that.