Bridger #4dls with #3 bridger dogless pan

I like that.

Looks good base plated on bottom? I see the bolts

Fiske, any mods to get the pans to work?

I used the bracket for a pit pan, drilled a hole through cross frame so you can adjust pan level same way a bridger dogless is done

Electrical covers for me. Who cares if you get a toe catch a catch is a catch..

Guess I forgot to post a pic on this thread of the completed sleepy creek 4 1/2 DLS's after the lams, pit pans and dogs were installed. Very happy with the way they turned out.

I like that! I really need to night latch my 4 1/2 SC.

Nice!!

One more of the completed Sleepy Creek offset 4 1/2 DLS project. Did a dozen and they all look just a sexy! Makes you feel like Jeramia Johnson when you are standing in the water holding one with a big beaver in it.😎

What is the inside measurement of the 41/2 sleepy creek?

7 1/2

Nice job

Can anyone talk about a no 11 offset double jaw for a coyote trap? I am curious if it’s enough trap . I use a few mb450 and seem to hold them fine. I use the smaller traps cause they seem to do well on off target such as coon and fox well. Like I said I’ve not really noticed a issue with the yotes in 450 so I’m kinda in the mind set that I don’t need a 2 or larger. With all that said, I’m not a yote master either. Thanks and any info is appreciated.

A no.11 double jaw was intended for mink,'rat and coon,skunks,possum,etc.For coyotes,forget it

Like Buck said not enough

like i said before other than newhouse longs the blake and lamb long springs are aweome very very strong springs and the number 44 is still my go to long spring for beaver trapping they are very hard to find now and are expensive so i have also went with the number 5 duke and that too is a great trap have had great luck with them and they are also very very strong springs and have a great pan banchee

I just got a bunch of #2 longs do they work good for coyote traps

They will work for coyote.

Ttt