How do you attach yours?

I wrap them around the bottom swivel on foot holds.

I attached them to the s hook near the stake on cable restraints.

Body grips, I wrap them around the stake end also.


Edit, to add I don’t need to tag muskrat traps, but still do.

I use duke traps and I use the copper tags. So I wrap the copper tags right under my pan on the trap base

Wire or hog ring one end then wrap around chain.

Depends on the tags you use. I make mine, so I roll them on a link of chain, but I DO like that under pan thing! Btw, if you weld the cross on the frame, and bend the jaw ends of those Dukes, they will hold a coyote as well as anything around my area!

Punch a hole on the back end fold them over and wire or hog ring usually end of trap chain funke i think used to offer tags with 2 holes Idea came from Gerald Schmitt

Cage ring, mini hog type ring on a chain link close to the trap ,roll it up 4x and squeeze with a pliars

Run snare wire through the hole on Larry finch tag, or I use electric motor wire to tie to my chain

I roll mine like ADC does .
Snares depends on if I have a wammie or not .
Sometimes I roll them tight and use as the wammie .

On trap chains, I fold a short piece to make a pocket, hook it on the chain and then continue folding it over. Then I squeeze it tight with pliers. It’s secure. 330s get the same on the 1/8” cable. Cages I’ll put a tag on the wire or extension cable. For snares, I pass the built in extension through the eye of the tag.

I use two hole tags...and when I can't get them I drill a second hole so one on each end of tag.
I drill two holes through base of trap then rivet them to the bottom with aluminum pop rivets. Never had one chewed off the bottom of the base of trap since the chains on mine are center mounted and direction of pull is generally away from the bottom of base plate.
On body grips I put it on the chain but run a rivet through both holes. Permanent fix, have to cut the tag to take it off.
Snares get same as pody grips and I put the tag at the end loop where extension or stake go.
Jim

Same as Aix

I roll mine on the trap spring. Look close how the one trigger caught up on the jaw and kept trap from catching. One lucky muskrat lol