Sounds about right. Mine was 93lbs and people's guesses were all over the place when they saw pics of it. Jumper makes boat anchors. I think I can carry one at a time on my little wheeler
What is the average = lbs drag a guy from Idaho uses for wolf? IF you had say = 2o ft of chain. Is a Saber Tooth drag at about 3 lbs enough?? What should be used ?
Yeah with 20 feet of chain it would work good. Of course it depends on where you are trapping, most of my trapping is done in timbered brushy country and they aren't going far without tangling up. Several guys are running Jumpers drags I believe, some are making their own to varying designs but usually larger than you can buy commercially, but I know several are using either MB or Sabertooth drags, usually with longer than the traditional 8-10' of chain. If you've got long enough chain it is going to hang up pretty fast if there is much brush at all. You will always have the exception that takes off running down a road, but usually they will hang up pretty fast if you have enough chain.
Although releasing a bear by yourself on 20 feet of chain could be interesting... especially if he decided to climb a tree.
Mine weigh with chain about what Jumpers weigh without.