These rectangular fur hangers I see, ya just slide the rod through the nose or eye hole’s and let em hang after board/dry until ready to ship?
How about beaver? I brought a couple of my boarded ones inside cuz I think it’s too humid in my garage….10C and about 75%. Now that winters here, I started drying the couple skins I got in the furnace room. The stiffer plain coat hangers aren’t stiff enough, just curl in. Might try and make one out of #9 wire or something similar, but these hangers look handy, if not for beaver at least for other hides.

They work for beaver too.

Doesn’t the hide kinda roll up a bit if you just hang it from the eye? Or you just leave it and they flatten back out when you go to drop them off?

They will curl a bit, especially if they werent the driest when taken off the boards.

I've seen pics of others just stacking them on a pallet or something...I think fur to fur, and hide to hide.

For beaver, ^^^this^^^ ---> just make sure they're dry

I needed some extra hangers one season for Fallon. I ended up using some wire stretchers for the material and copied the design of the 3 that I had purchased previously.