Re: Skinning machine questions
[Re: TheYouthTrapper]
#8010146
12/03/23 09:30 AM
12/03/23 09:30 AM
|
Joined: Mar 2011
Posts: 25,552 williams,mn
trapper les
trapper
|
trapper
Joined: Mar 2011
Posts: 25,552
williams,mn
|
Harbor Freight 220/440 lb hoist, and I hung it from the rafters ...I put a piece of garage door railing through it and bolted it up across 4 rafters. I used the extra pulley that you would use to compound the pulling power to allow for the controls down by my hand....it's just a pulley up top and that gave me about 8" more room / length. I bought the Base from ADC 100 years ago.
"Those who hammer their guns into plowshares will plow for those who do not."
|
|
|
Re: Skinning machine questions
[Re: TheYouthTrapper]
#8010147
12/03/23 09:31 AM
12/03/23 09:31 AM
|
Joined: Mar 2011
Posts: 25,552 williams,mn
trapper les
trapper
|
trapper
Joined: Mar 2011
Posts: 25,552
williams,mn
|
PS , I could seem to get the flash to work on my phone camera
"Those who hammer their guns into plowshares will plow for those who do not."
|
|
|
Re: Skinning machine questions
[Re: TheYouthTrapper]
#8010458
12/03/23 05:44 PM
12/03/23 05:44 PM
|
Joined: Dec 2006
Posts: 24,136 Wisconsin
The Beav
trapper
|
trapper
Joined: Dec 2006
Posts: 24,136
Wisconsin
|
Op do you have a cement floor? If so just put threaded anchor In the floor. Then screw In a hook. Make yourself a cable slip noose. One end is like a noose the other end Is a fixed loop. Hang your critter by It's hind legs open It up. Place the slip noose around the tail and flank fur. Then hook up the other end of the noose to the hook In the floor. Forget about all thees bases with vice grips or roller systems or gates to hold the fur. They just limit your pulling height. If you are really cramped for head room You can always re adjust the slip noose as you pull.
The forum Know It All according to Muskrat
|
|
|
Re: Skinning machine questions
[Re: The Beav]
#8011190
12/04/23 10:38 AM
12/04/23 10:38 AM
|
Joined: Jun 2022
Posts: 1,421 South Dakota
TheYouthTrapper
OP
trapper
|
OP
trapper
Joined: Jun 2022
Posts: 1,421
South Dakota
|
Op do you have a cement floor? If so just put threaded anchor In the floor. Then screw In a hook. Make yourself a cable slip noose. One end is like a noose the other end Is a fixed loop. Hang your critter by It's hind legs open It up. Place the slip noose around the tail and flank fur. Then hook up the other end of the noose to the hook In the floor. Forget about all thees bases with vice grips or roller systems or gates to hold the fur. They just limit your pulling height. If you are really cramped for head room You can always re adjust the slip noose as you pull. I do but I'm wanting to keep it stand alone since I may have to move it next year and will definitely need to in a few years.
|
|
|
Re: Skinning machine questions
[Re: TheYouthTrapper]
#8011279
12/04/23 12:42 PM
12/04/23 12:42 PM
|
Joined: Dec 2006
Posts: 24,136 Wisconsin
The Beav
trapper
|
trapper
Joined: Dec 2006
Posts: 24,136
Wisconsin
|
Well when you want to move It just just fill the anchor holes with a flat headed bolt. Or fill them with some type of grout.
The forum Know It All according to Muskrat
|
|
|
|
|