Many Thanks, Bob!

I'll take you up on that!

Check out Lil’ Stinker Skunk Pole by Arvins Wildlife Solutions. Preston at Black Water Trapping Supply has them I believe but might not be up on his website yet. Reach out to him. He is as good as they come.

I got one of those adjustable paint poles, the ones you use with a paint roller. Then I had my machinist friend make me two round metal plugs with 3/8Ths hole through the plug. I put one on each end. Then I got a of fiber glass rod that fit through the plugs. I put a stop on the back end so it wouldn't slid all the way through. When it's pushed it hits the plunger on the syringe. I made a holder that is attached to the pole and the syringe snaps into it.

only thing I have used for 30+ years, 5' of 3/4" ppvc with a 5'6" 1/2" plunger
cap on top end drilled to just over 1/2" cap on the bottom with 5/16" hole 12cc syringe with the "ears" cut off

I looked at the one that 20scout on here makes. They are nice light weight. I would bet he has syringes.

I get mine from Amazon but most tractor supply stores should have them.