Re: How do you open J-hooks
[Re: carcajouhunter]
#915541
10/04/08 08:03 PM
10/04/08 08:03 PM
|
Joined: Nov 2007
Posts: 1,658 Mt Erie, Illinois
minkmaster
trapper
|
trapper
Joined: Nov 2007
Posts: 1,658
Mt Erie, Illinois
|
I usually clap one end in a vice, and use either a screwdriver or a chisel and a hammer to open it. The HD ones are a rip to do though.
It takes 1 tree to make 1000 matches, but 1 match to burn 1000 trees. - Unknown.
|
|
|
Re: How do you open J-hooks
[Re: minkmaster]
#915544
10/04/08 08:03 PM
10/04/08 08:03 PM
|
Joined: Nov 2007
Posts: 1,658 Mt Erie, Illinois
minkmaster
trapper
|
trapper
Joined: Nov 2007
Posts: 1,658
Mt Erie, Illinois
|
Wait, nevermind, You said on the line, should have read your whole post.
It takes 1 tree to make 1000 matches, but 1 match to burn 1000 trees. - Unknown.
|
|
|
Re: How do you open J-hooks
[Re: minkmaster]
#915549
10/04/08 08:04 PM
10/04/08 08:04 PM
|
Joined: Jan 2007
Posts: 3,231 south east pa
lennitrapper
trapper
|
trapper
Joined: Jan 2007
Posts: 3,231
south east pa
|
i used a small flat head screw driver and twisted it took a try or two to get em but now i have a S hook tool and it works alot easyer for me
red fox trapper wannabe.
Pro-sqeazin Pro Staff Member "What was your bait?? Cobra?" white 17
|
|
|
Re: How do you open J-hooks
[Re: minkmaster]
#915555
10/04/08 08:07 PM
10/04/08 08:07 PM
|
Lil' Bit
Unregistered
|
Lil' Bit
Unregistered
|
I have a pair of fencing pliers and a pair of vicegrips. Always does the trick for me. I grip the Jhook stem with the vice grips, and then take the fencing pliers and squeeze the middle pliers part around the jhook. Most of the time, that will partially open it. Then I move the pliers a little more towards the opening part of the loop and just pull. It opens right up.
|
|
|
Re: How do you open J-hooks
[Re: ]
#915567
10/04/08 08:15 PM
10/04/08 08:15 PM
|
Joined: Dec 2006
Posts: 1,249 NW Missouri
bob56
trapper
|
trapper
Joined: Dec 2006
Posts: 1,249
NW Missouri
|
Not all S hook pliers are the same, I have one pair that easily opens J hooks, while another pair I have are pain to try to open them. I also have a pair of Ron Marsh's which work good.
“A government big enough to give you everything you want, is strong enough to take everything you have.” - Thomas Jefferson
|
|
|
Re: How do you open J-hooks
[Re: ]
#915572
10/04/08 08:18 PM
10/04/08 08:18 PM
|
Joined: Dec 2006
Posts: 1,677 SE Nebraska
Martin
trapper
|
trapper
Joined: Dec 2006
Posts: 1,677
SE Nebraska
|
I just put the point of a trowel in the eye and give it a smack with the hammer. Opens it just enough to slide the cable out.
|
|
|
Re: How do you open J-hooks
[Re: Jonathan]
#915903
10/05/08 03:21 AM
10/05/08 03:21 AM
|
Joined: Mar 2007
Posts: 2,529 South Dakota
TravC
"MCnasty"
|
"MCnasty"
Joined: Mar 2007
Posts: 2,529
South Dakota
|
when i leave the pliers or the s hook tool at the truck i attempt to usualy ends up with alot of cussin stompin and a heated argument with myself and a walk to the truck
There i said it....
|
|
|
Re: How do you open J-hooks
[Re: tonymalone]
#915916
10/05/08 05:49 AM
10/05/08 05:49 AM
|
Joined: Dec 2006
Posts: 12,209 Oakland, MS
Drifter
trapper
|
trapper
Joined: Dec 2006
Posts: 12,209
Oakland, MS
|
I use a good pair of diagnal cutter some call dikes . Line em up with the openning and squeeze . It will open them enough to slip the cable right out . I don't reuse rivets either . They are a good deterant to trap thieves as well unless they are well prepared .
For openning them to put into the washers a pair of 1/4 in pipe nipples 6 in long .
Drifter
Some individuals use statistics as a drunk man uses lamp-posts — for support rather than for illumination.
Andrew Lang (1844-1912) Scottish poet, novelist and literary critic
Life member NTA , and GA Trappers assoc .
|
|
|
|
|