Looking for an accurate 22LR, BOLT, and threaded 1/2x28.
Let me know your hands on experience or another make/model for $1,000 or less
Many thanks, appreciate it. .

Don’t Mike anything about it outside the fact you can’t go wrong with a CZ anything…

You are on the right track. Look for the MTR model.

Same as TC1.

Don't know the 457, but I love my 527 in 204 and my SP01 in 9mm. Fit and finish are great and they both shoot great.

I dont have a 457 but bought my youngest a 455 scout years ago and its great all the way around.

I like the 457 safety better then the 455's.

But they dont make the 457 threaded with 16" barrel or at least did not last year.

So if I would buy one in would get it in the yout model called the scout. Those come 16" and threaded and I would buy an adult stock for it. You could probably look around and. Find a factory stock on line someone took off for something else pretty cheap. At.least that is my plan if I buy another .22 rifle. Cz are the best quality and value combined..

Id stay away from the Cz 600s. My only other hang up with Cz is they took part in the Canadian gun confiscation by destroying the guns if that is an issue for anyone. Also ive tried to contact their costumer service 3 times via email without any response back.

I have called them 2 times and spoke to a person and got the info and products I needed. I never tried e mail though.

Don't know or have read anything about the 457's. I bought a 455 several years ago and said Hmmm after I took it to the range a few times. IIRC it was the varmiter series in 22 mag. I was getting 1 in'sh groups at 100 yds with CCi ammo. I was impressed enough to go buy another 455 in 22 LR. Similarly impressed at the range at 50 yds. Also, the LR came with the threads for a suppressor.