Anybody thought up some clever ways to organize your Gophinators or Trapline mole traps?

I've got a wire that hangs across the mouth of a 5 gallon bucket that I hang the traps on. I'll try to remember to snap a pic in the morning.

If you are talking about organizing by size I put a red bead on the loop end of the large trap and a white bead on the small traps. As far as getting tangled up, nothing yet.

If you are talking about organizing by size I put a red bead on the loop end of the large trap and a white bead on the small traps. As far as getting tangled up, nothing yet.

Dang. Forgot to snap a pic this morning.

Everet, I was talking about getting tangled up, but the color coding tip will come in handy, too.

Thanks!

I haven't done this yet, but am planning to this winter.

Going to take some snare cable and make tie offs out of that, the loop could then be hung from a carabiner or any other type of
loop holder. When I first got them, I just took some galvanized wire and tied them each off so I had something sticking out above
ground with my flags, talk about a pain, should have spent the time up front!

Snare cable with loops I think is a great way to go, and by hanging them, should take care of the tangling issues.

Justin

Someone posted on here about using using stainless fishing leaders for tethers. I tried them and they worked great. Credit goes to him though for the good idea. As far as keeping them apart for easy access just cut some short pieces of 2" PVC pipe and use PVC glue to attach them together face up in a carry tray. Then just insert one trap per tube.