Those of you that use chain saw to cut ice beaver trapping, what do you change the bar oil to, veg. oil?

Yes, that works

going to try and use it to open the ice then chop to check

I prefer an ice saw over a chainsaw. A lot lighter and don't have to deal with spraying water and rusted up/frozen saw parts later.

Beaver trapping or spear shack hole cutting, look into an ice saw if you're going to be doing it on a regular basis.

If not, bring your saw in afterwards and let it dry out good.

I don't use anything. Just at the end of the day I take it in dry it out and spray wd40 on the chain and sprockets. Ice stretches out chains

It is a good method for cutting and cleaning out holes tho.

takeing inside at end of the day is no problem and wd40 is great deal as well. thanks

Nothing for bar lube when cutting ice.

I was surprised to see the last gallon of bar oil I purchased was a vegetable based oil. I think it was a Tractor Supply product.

thanks