Water Trapping Archive


No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum


~Catalog~

Print Thread
Hop To
Page 4 of 7 1 2 3 4 5 6 7
Re: Teeth on a beaver trap [Re: forester79] #6257863
06/11/18 09:24 AM
06/11/18 09:24 AM
Joined: Dec 2010
Posts: 4,948
central arkansas
T
the Blak Spot Offline
trapper
the Blak Spot  Offline
trapper
T

Joined: Dec 2010
Posts: 4,948
central arkansas
Originally Posted By: forester79
Just a thought on this. What about using a Bridger #5 offset and filling in the offset with pieces of key stock to make teeth.

I have pondered this. Arkansas law states traps must be "smooth jawed" doesnt say "flat".
I couldnt use "teeth" but "lugs" maybe an option


the just shall live by faith

member FTA, ATA, EAFT
1776 - the year we told a tyrant we weren't to be under a dictator
Caveat ater macula
Re: Teeth on a beaver trap [Re: Ringbill5196] #6257864
06/11/18 09:29 AM
06/11/18 09:29 AM
Joined: Jul 2013
Posts: 13,551
Amite county Mississippi
Wolfdog91 Offline
trapper
Wolfdog91  Offline
trapper

Joined: Jul 2013
Posts: 13,551
Amite county Mississippi
Originally Posted By: Ringbill5196
I am not a fan of the teeth just because I don’t see a need. In Minnesota you can garage sale them at $25 for the Victor jumps. When I buy auction trap lots I do not think they add cost to the lot a bit unless someone is specifically after them.

I use jumps solely on baited under ice platforms. Dale Torma taught me that.

Ran into TS-85s with nail teeth welded on at a County job this year. What a fear some device! I didn’t care to set that in muddy water and shutter at that getting a dog.

My impression talking to older trappers whom used them for the last 50 yrs was they did not want them sharp but the uneven edge was the reason they held. At least one company makes a squarish tooth trap, maybe even a hard rubber jaw. I see some canine potential in that worth studying.
Originally Posted By: Ringbill5196
I am not a fan of the teeth just because I don’t see a need. In Minnesota you can garage sale them at $25 for the Victor jumps. When I buy auction trap lots I do not think they add cost to the lot a bit unless someone is specifically after them.

I use jumps solely on baited under ice platforms. Dale Torma taught me that.

Ran into TS-85s with nail teeth welded on at a County job this year. What a fear some device! I didn’t care to set that in muddy water and shutter at that getting a dog.

My impression talking to older trappers whom used them for the last 50 yrs was they did not want them sharp but the uneven edge was the reason they held. At least one company makes a squarish tooth trap, maybe even a hard rubber jaw. I see some canine potential in that worth studying.
your referring to the lpc ez grip trap.



Cool thing about this company is they actually make a replacement set of jaws for the Victor 3n traps is $15 a pair but I mean.

On a separate note for canine's I've talked to a live market trappers from here in Ms who welded but bless across this trap jaws along with a good size offset. He said that treat animals better than almost anything elese he's tried! Again he was a live market guy so minimal damage to the animal is paramount ! Said the only reason he stopped was because game and fish said they were technically teeth.

This isnt his but he did something similar.

Re: Teeth on a beaver trap [Re: AJE] #6257884
06/11/18 10:14 AM
06/11/18 10:14 AM
Joined: Dec 2006
Posts: 10,396
Northern Illinois
M
MChewk Offline
trapper
MChewk  Offline
trapper
M

Joined: Dec 2006
Posts: 10,396
Northern Illinois
Better checked LPC's updated prices...called recently and was shocked.

Re: Teeth on a beaver trap [Re: AJE] #6258012
06/11/18 01:50 PM
06/11/18 01:50 PM
Joined: Apr 2012
Posts: 5,445
Southern Michigan
T
trappergbus Offline
trapper
trappergbus  Offline
trapper
T

Joined: Apr 2012
Posts: 5,445
Southern Michigan
Has anyone tried checkering the jaw surface like on gun stocks?? If the paw can't move it won't get cut..


Common sense catches alot of fur..
Pay homage to all you harvest..
Re: Teeth on a beaver trap [Re: AJE] #6258125
06/11/18 04:30 PM
06/11/18 04:30 PM
Joined: Dec 2006
Posts: 24,198
Wisconsin
T
The Beav Offline
trapper
The Beav  Offline
trapper
T

Joined: Dec 2006
Posts: 24,198
Wisconsin
Those aren't teeth wolfie.
Teeth over lap the jaws when closed.


The forum Know It All according to Muskrat
Re: Teeth on a beaver trap [Re: AJE] #6258133
06/11/18 04:44 PM
06/11/18 04:44 PM
Joined: Apr 2012
Posts: 5,445
Southern Michigan
T
trappergbus Offline
trapper
trappergbus  Offline
trapper
T

Joined: Apr 2012
Posts: 5,445
Southern Michigan
I believe those are best called traction nodules..


Common sense catches alot of fur..
Pay homage to all you harvest..
Re: Teeth on a beaver trap [Re: AJE] #6258159
06/11/18 05:53 PM
06/11/18 05:53 PM
Joined: Dec 2006
Posts: 24,198
Wisconsin
T
The Beav Offline
trapper
The Beav  Offline
trapper
T

Joined: Dec 2006
Posts: 24,198
Wisconsin
Most likely. LOL


The forum Know It All according to Muskrat
Re: Teeth on a beaver trap [Re: Wolfdog91] #6265113
06/22/18 05:45 PM
06/22/18 05:45 PM
Joined: Apr 2007
Posts: 17,411
Central Ohio
LT GREY Offline
trapper
LT GREY  Offline
trapper

Joined: Apr 2007
Posts: 17,411
Central Ohio
Originally Posted By: Wolfdog91
Bubble welds across the jaw face


That's a little known art, Wolfie... smile

In Minnesota it's legal, not sure about Wisconsin. You don't need teeth on a trap to hold wolf or beaver.
Does it work ? Yes. Just not totally needed to be successful

Re: Teeth on a beaver trap [Re: AJE] #6265221
06/22/18 08:32 PM
06/22/18 08:32 PM
Joined: Sep 2008
Posts: 329
wisconsin
F
forester79 Offline
trapper
forester79  Offline
trapper
F

Joined: Sep 2008
Posts: 329
wisconsin
Legal in WI must be submerged at all times.



Re: Teeth on a beaver trap [Re: AJE] #6267103
06/25/18 09:06 PM
06/25/18 09:06 PM
Joined: Jan 2007
Posts: 581
Northern Maine
Jeremiah Wood Offline
trapper
Jeremiah Wood  Offline
trapper

Joined: Jan 2007
Posts: 581
Northern Maine
The 14 is tough to beat for under ice beaver trapping IMO. Didn't have any this past winter and had a pullout on a brand new #4 coil. Picked up a pile of them for next year. Like others have said, I've seen very little foot damage with these due to lack of back-and-forth movement along the face of the jaws.

I also remember the wolf study where a toothed trap produced the least foot damage of all designs. Funny how our assumptions can often be wrong when looking objectively at the data. I'm not sure you could make the same conclusions for all toothed traps....would like to see BMP results for those. I vaguely remember the wolf trap design having a limited number of teeth, does that sound right??? Would be neat if someone had a link to that study.

Re: Teeth on a beaver trap [Re: AJE] #6267148
06/25/18 10:31 PM
06/25/18 10:31 PM
Joined: Jan 2007
Posts: 5,459
Montana
Taximan Offline
trapper
Taximan  Offline
trapper

Joined: Jan 2007
Posts: 5,459
Montana
I don't know of a study but there was an article in the Trapper's Post by a researcher that talked about it,using the LPC #7.The teeth reduced edema.

Last edited by Taximan; 06/25/18 10:33 PM.
Re: Teeth on a beaver trap [Re: AJE] #6268218
06/27/18 02:46 PM
06/27/18 02:46 PM
Joined: Oct 2013
Posts: 11
SW Montmorency Co, MI
L
langenc Offline
trapper
langenc  Offline
trapper
L

Joined: Oct 2013
Posts: 11
SW Montmorency Co, MI
I had a #14 stolen about 65 years ago(not in MI). Not legal in MI now.


22 Chuck
Re: Teeth on a beaver trap [Re: Taximan] #6268730
06/28/18 12:22 PM
06/28/18 12:22 PM
Joined: Jul 2013
Posts: 13,551
Amite county Mississippi
Wolfdog91 Offline
trapper
Wolfdog91  Offline
trapper

Joined: Jul 2013
Posts: 13,551
Amite county Mississippi
Originally Posted By: Taximan
I don't know of a study but there was an article in the Trapper's Post by a researcher that talked about it,using the LPC #7.The teeth reduced edema.
if you can find the one done by T.t.turnbull they have some good info on the subject

Re: Teeth on a beaver trap [Re: AJE] #6268814
06/28/18 02:51 PM
06/28/18 02:51 PM
Joined: Dec 2006
Posts: 4,145
Pa
W
Wright Brothers Offline
trapper
Wright Brothers  Offline
trapper
W

Joined: Dec 2006
Posts: 4,145
Pa
Bus what you refer to in metal is named knurling. I've considered it but not tried.
Like on a ratchet wrench handle.

I still have a couple of those crimp on teeth from the 70s.
I did not use those for long.





Re: Teeth on a beaver trap [Re: AJE] #6268869
06/28/18 04:57 PM
06/28/18 04:57 PM
Joined: Jan 2018
Posts: 90
Georgia
G
GreginGA Offline
trapper
GreginGA  Offline
trapper
G

Joined: Jan 2018
Posts: 90
Georgia
Anybody have experience with the Blake & Lamb 44 double underspring traps? I recall some of the more experienced trappers in my area in the 70's and 80's used them. I think they were already out of production by the late 70's. Do they have the same jaw spread as the 44 double longspring? Are the springs strong enough for beaver?

Re: Teeth on a beaver trap [Re: AJE] #6268886
06/28/18 05:13 PM
06/28/18 05:13 PM
Joined: Jan 2007
Posts: 581
Northern Maine
Jeremiah Wood Offline
trapper
Jeremiah Wood  Offline
trapper

Joined: Jan 2007
Posts: 581
Northern Maine
I have some listed for sale on Ebay right now. Inside jaw spread is approx 5 1/2" x 6 3/4". The springs on mine seem pretty strong, but I've never used them for beaver.

Re: Teeth on a beaver trap [Re: AJE] #6268908
06/28/18 05:55 PM
06/28/18 05:55 PM
Joined: May 2011
Posts: 2,557
Garden,Michigan
B
Buck (Zandra) Offline
trapper
Buck (Zandra)  Offline
trapper
B

Joined: May 2011
Posts: 2,557
Garden,Michigan
I've used the old 44 under springs,still have some in fact.Decent beaver trap,only problem I had was buying ones with good springs.Those small leaf springs get weak and you really had no way to replace them.If you find some with decent springs they'll do the job for you.


Buck(formely known as Zandra)
Re: Teeth on a beaver trap [Re: Wright Brothers] #6269507
06/29/18 05:38 PM
06/29/18 05:38 PM
Joined: Apr 2012
Posts: 5,445
Southern Michigan
T
trappergbus Offline
trapper
trappergbus  Offline
trapper
T

Joined: Apr 2012
Posts: 5,445
Southern Michigan
Originally Posted By: Wright Brothers
Bus what you refer to in metal is named knurling. I've considered it but not tried.
Like on a ratchet wrench handle.

I still have a couple of those crimp on teeth from the 70s.
I did not use those for long.


Yes thats what I was refering to. Would not have to be much to keep the paw in place..


Common sense catches alot of fur..
Pay homage to all you harvest..
Re: Teeth on a beaver trap [Re: AJE] #6269525
06/29/18 06:15 PM
06/29/18 06:15 PM
Joined: Jan 2018
Posts: 90
Georgia
G
GreginGA Offline
trapper
GreginGA  Offline
trapper
G

Joined: Jan 2018
Posts: 90
Georgia
For you guys that have used or use them, are the Oneida 14 traps with teeth not as good as/the same as/better than the large coilsprings traps we have access to, today? Working from memory, I believe they have a 7" or 7 1/4" jaw spread.

Re: Teeth on a beaver trap [Re: AJE] #6269572
06/29/18 07:47 PM
06/29/18 07:47 PM
Joined: Dec 2006
Posts: 24,198
Wisconsin
T
The Beav Offline
trapper
The Beav  Offline
trapper
T

Joined: Dec 2006
Posts: 24,198
Wisconsin
The 14s are top of the line beaver traps. I've used them for 25 years or so. But the MB 750s are also great traps. I sold all my 14s years ago and went to the 750s. The 750s are just more versatile and can be used In states where you can't use a toothed trap.


Those clamp on teeth deals where just plain nasty. A critter doesn't deserve that kind of treatment.


The forum Know It All according to Muskrat
Page 4 of 7 1 2 3 4 5 6 7
Previous Thread
Index
Next Thread

Moderated by  Wolfdog91 

Powered by UBB.threads™ PHP Forum Software 7.7.1