Fur Handling Archive


No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum


~Catalog~

Print Thread
Hop To
Page 1 of 9 1 2 3 4 5 6 7 8 9
Fur Shed Tips & Tricks #6300578
08/13/18 10:21 AM
08/13/18 10:21 AM
Joined: Dec 2006
Posts: 3,384
Pennsylvania
H
Hern Offline OP
trapper
Hern  Offline OP
trapper
H

Joined: Dec 2006
Posts: 3,384
Pennsylvania
Let's get the shed in order before the season and do some projects before the season.
...here's some things that may help you with fur put up...

I made a 'third hand' board holder.
Two pieces of wood, screwed to front of flesh'n table to forum a slot or ledge for board to sit in. Nose of board is against wall.
This enables me to pull and pin skirt & tail in place, while working with both hands.


I learn this on T-man, from Boco...
I now use Quilting pins or T-pins (Walmart sewing section) to open tails for drying.
Red Fox


Grey Fox







Can you add a tip or two?

Re: Fur Shed Tips & Tricks [Re: Hern] #6300580
08/13/18 10:31 AM
08/13/18 10:31 AM
Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
B
Boco Online content
trapper
Boco  Online Content
trapper
B

Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
Use poultry shears for fleshing feet and heads for taxi species.


Forget that fear of gravity-get a little savagery in your life.
Re: Fur Shed Tips & Tricks [Re: Hern] #6300582
08/13/18 10:35 AM
08/13/18 10:35 AM
Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
B
Boco Online content
trapper
Boco  Online Content
trapper
B

Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
Use a bone otter clean skinner to open up the chest\upper leg area on difficult taxi species like wolf before skinning

.


Forget that fear of gravity-get a little savagery in your life.
Re: Fur Shed Tips & Tricks [Re: Hern] #6300586
08/13/18 10:41 AM
08/13/18 10:41 AM
Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
B
Boco Online content
trapper
Boco  Online Content
trapper
B

Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.

Use beaver hooks to help skin toes.

Last edited by Boco; 08/13/18 10:42 AM.

Forget that fear of gravity-get a little savagery in your life.
Re: Fur Shed Tips & Tricks [Re: Hern] #6300592
08/13/18 10:46 AM
08/13/18 10:46 AM
Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
B
Boco Online content
trapper
Boco  Online Content
trapper
B

Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.

Use a hand magnet for handling nails and pins.(and picking up spilled ones from the floor)


Forget that fear of gravity-get a little savagery in your life.
Re: Fur Shed Tips & Tricks [Re: Hern] #6300600
08/13/18 10:52 AM
08/13/18 10:52 AM
Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
B
Boco Online content
trapper
Boco  Online Content
trapper
B

Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.

Use two keys in the back as well as one in the belly after turning fur out,on large animals to allow easy pelt removal and provide an air space between the board and pelt for proper drying.


Forget that fear of gravity-get a little savagery in your life.
Re: Fur Shed Tips & Tricks [Re: Hern] #6300606
08/13/18 10:57 AM
08/13/18 10:57 AM
Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
B
Boco Online content
trapper
Boco  Online Content
trapper
B

Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.

Use a shop vac to blow dust out of your pelts before shipping.


Forget that fear of gravity-get a little savagery in your life.
Re: Fur Shed Tips & Tricks [Re: Hern] #6300612
08/13/18 11:08 AM
08/13/18 11:08 AM
Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
B
Boco Online content
trapper
Boco  Online Content
trapper
B

Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.


Use a one handed flesher and a small beam to flesh mink marten etc.


Forget that fear of gravity-get a little savagery in your life.
Re: Fur Shed Tips & Tricks [Re: Hern] #6300781
08/13/18 02:48 PM
08/13/18 02:48 PM
Joined: May 2010
Posts: 2,738
Iowa
C
coydog2 Offline
trapper
coydog2  Offline
trapper
C

Joined: May 2010
Posts: 2,738
Iowa
I use wire nails for in place of push pins and also on my coyote and otter and coon and mink and what ever else.I use the ones that is over 2" long.easy to handle.If this might help someone.


Life member of DAV,NTA,NRA,ITA.Also member of FTA,CBA
Re: Fur Shed Tips & Tricks [Re: Hern] #6300782
08/13/18 02:48 PM
08/13/18 02:48 PM
Joined: May 2014
Posts: 4,828
Southwest Michigan
M
Michigan Trappin Offline
trapper
Michigan Trappin  Offline
trapper
M

Joined: May 2014
Posts: 4,828
Southwest Michigan
Great stuff. Thx for sharing


Every day is a gift from GOD, don't waste it!!

If they have plenty of food, give them something interesting to smell
Re: Fur Shed Tips & Tricks [Re: Hern] #6300863
08/13/18 04:10 PM
08/13/18 04:10 PM
Joined: Jan 2010
Posts: 1,276
Manitoba Canada
M
MB Coonguy Offline
trapper
MB Coonguy  Offline
trapper
M

Joined: Jan 2010
Posts: 1,276
Manitoba Canada
What kind of nails are those Boco? They look very thin and sharp.By the way I have said it before and I will say it again-your put up on beavers is amazing! Man they look fantastic!

Re: Fur Shed Tips & Tricks [Re: Hern] #6301071
08/13/18 07:14 PM
08/13/18 07:14 PM
Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
B
Boco Online content
trapper
Boco  Online Content
trapper
B

Joined: Aug 2011
Posts: 45,263
james bay frontierOnt.
Thanks MB.Those are pinning nails.I bought a couple boxes years ago off a trapper that was selling them at a council meeting.


Forget that fear of gravity-get a little savagery in your life.
Re: Fur Shed Tips & Tricks [Re: Hern] #6301114
08/13/18 07:50 PM
08/13/18 07:50 PM
Joined: Jun 2010
Posts: 16,261
Iowa
~ADC~ Online content
The Count
~ADC~  Online Content
The Count

Joined: Jun 2010
Posts: 16,261
Iowa
I converted an old dryer into a fur tumbler. Fist thing I did was open the back of the dryer and cut all the wires except the ones that turn the drum. Those two wires I attached to the end of an old drop cord so it will run off 110V. instead of 220V. I then duct taped the holes on inside of the drum closed. It's then ready to tumble furs...



I toss in some corncob horse bedding like this... http://www.tractorsupply.com/en/store/best-cob-premium-horse-bedding

2-4 cups is what I use and add more as it needs it....



Here is a coon that was wet and muddy when I skinned it. I then hung it to dry overnight...



Up close...



Same coon after tumbling for about 8-10 min (you can put 5-6 coons in there at a time) ...



Closer up...



I know guys complain the dryers don't do as a good of a job as the big drums, and that you need expensive media in it, but this works good enough for me.

~ADC~

Re: Fur Shed Tips & Tricks [Re: Hern] #6301136
08/13/18 08:12 PM
08/13/18 08:12 PM
Joined: Sep 2007
Posts: 5,947
South metro, MN
C
Calvin Offline
trapper
Calvin  Offline
trapper
C

Joined: Sep 2007
Posts: 5,947
South metro, MN
Ceiling fan(s) instead of light fixtures. More light with a fan option.

Re: Fur Shed Tips & Tricks [Re: Hern] #6301138
08/13/18 08:13 PM
08/13/18 08:13 PM
Joined: Jul 2008
Posts: 2,414
Idaho Falls, Idaho
F
Furvor Offline
trapper
Furvor  Offline
trapper
F

Joined: Jul 2008
Posts: 2,414
Idaho Falls, Idaho
This is not for inexperienced fur handlers. Years ago when trapping grey fox in Southwest deserts where pelts dry fast I would sometimes put the skin flesh side out turned 90 degrees from normal on the stretcher so animal back would be on one edge of stretcher and belly on other edge. When pelt was turned fur side out and put on stretcher normally there would be no ridges on sides to interfere with getting it on straight.

Last edited by Furvor; 08/13/18 08:31 PM.
Re: Fur Shed Tips & Tricks [Re: Hern] #6301410
08/14/18 05:59 AM
08/14/18 05:59 AM
Joined: Aug 2013
Posts: 8,312
Firth, Nebraska
jabNE Offline
trapper
jabNE  Offline
trapper

Joined: Aug 2013
Posts: 8,312
Firth, Nebraska
An inexpensive kiddie wading pool under the fleshing beam catches almost all of the fat and scraps, and saves floor cleaning later.


Money cannot buy you happiness, but it can buy you a trapping license and that's pretty close.
Re: Fur Shed Tips & Tricks [Re: Hern] #6301426
08/14/18 07:00 AM
08/14/18 07:00 AM
Joined: Sep 2010
Posts: 6,545
NC, Orange Co.
QuietButDeadly Offline
trapper
QuietButDeadly  Offline
trapper

Joined: Sep 2010
Posts: 6,545
NC, Orange Co.
A big piece of cardboard under your skinning rig sure keeps a lot of mess off the floor. And when it gets nasty, replace it with a new sheet of cardboard. This can also work well under your fleshing beam.

And your local auto body shop is a good source for cardboard. They get lots of big parts like hoods, fenders and bumpers in fairly heavy duty boxes that you can breakdown and use. Sure makes clean up easier IMO.


Life Member: NCTA, VTA, NTA, TTFHA, MFTI
Member: FTA NRA NWTF
Re: Fur Shed Tips & Tricks [Re: Hern] #6301461
08/14/18 07:50 AM
08/14/18 07:50 AM
Joined: Aug 2013
Posts: 8,312
Firth, Nebraska
jabNE Offline
trapper
jabNE  Offline
trapper

Joined: Aug 2013
Posts: 8,312
Firth, Nebraska
Keep a little moveable table or stand nearby the overhead skinning gambrel. Helps me to have nice place to put knives, tail pullers, zippers, and other stuff handy and within just one arms reach when working hides off the carcass. I have an old steel knife sharpening rod there too. Not for sharpening knives, but I can shove that into gap under a coyote or coon front leg and use it as leverage to pull the hide down over rest of the front leg. Push it through the armpit area, grab each side of the tool, and pull down. I suppose a wooden dowel would work too, but I've used this old sharpening steel rod for years and it works great for leg pulling.
Jim


Money cannot buy you happiness, but it can buy you a trapping license and that's pretty close.
Re: Fur Shed Tips & Tricks [Re: Hern] #6301477
08/14/18 08:07 AM
08/14/18 08:07 AM
Joined: May 2010
Posts: 28,978
potter co. p.a.
P
pcr2 Offline
"Twerker"
pcr2  Offline
"Twerker"
P

Joined: May 2010
Posts: 28,978
potter co. p.a.
my tool bench in the fur shed is a gutted and stabalized old console tv.heavy castors with a good sized top for all my tools and stuff with storage for extra's underneath.roll it wherever it's needed.

broken off tails-keep an old snare around to hook on the bone and pull like normal.

always,always,comb things good before fleshing.a burr has turned many a nice hide to a damage.

keep your mouth closed when you flesh as you never know when you are gonna hit a puss pocket or where it will go.









Re: Fur Shed Tips & Tricks [Re: Hern] #6301565
08/14/18 09:47 AM
08/14/18 09:47 AM
Joined: Feb 2009
Posts: 291
Kansas
C
cutmjack Offline
trapper
cutmjack  Offline
trapper
C

Joined: Feb 2009
Posts: 291
Kansas
What ADC says...always. He has tons of good tips. Buy/build one of his skinning machines.
Use a hook blade to go toe to toe opening coons. The dryer conversion is slick and makes 'em look like they just got back from the beauty salon. Water trappers would love it with muddy coons.
Beav's got good stuff, too. Best advice I gleaned from his posts was to put the belly board in from the head, rather than the tail end. MUCH easier to get hide off as the head gets the tightest.
KISS method with Newt. Catch tons of coons with nothing but DP's (wonderful on public ground with virtually no worries) and Jack Mack for $1.38/can at Wally World. If it's going to freeze, ALWAYS keep wet/fish bait below the trigger. Or buy 20 lb sack of cat food in fish varieties, add liquid smoke, bacon grease and a little red fox urine/gland lure. It's killer.
Don't skin skunks or pull essence if your wife will be home soon. But do it because the pods and juice are the most valuable part of the critter.
Mostly, enjoy and read this site, archives and everything, as it shortens the learning curve tremendously. I appreciate everyone sharing.
Nice idea, Hern.

Page 1 of 9 1 2 3 4 5 6 7 8 9
Previous Thread
Index
Next Thread

Moderated by  Wolfdog91 

Powered by UBB.threads™ PHP Forum Software 7.7.1