Has anybody laminated any #2 Bridger dog less over and under the jaws ? also what did you use 3/16 or ¼ rod pictures would be a big help!

3/16 and on the outside of the jaw only. I dont have a trap here to look at, but I think laminating under the jaw could cause problems with the dogless feature.

Did 3/16” outside, works well. If u do inside how u going get the pan to latch.

I did over the jaws 3/16

Laminate one inside jaw with full length lamination. The trigger side leave enough space for the trigger to hook onto the jaw. Basically, you have to make the trigger side two piece. It works, but is sort of a pain compared to one piece lams.

Outside laminations using a 20d nail.

Thanks fellows