Re: Computer problems can't get fixed.
[Re: white17]
#6622230
09/21/19 09:43 PM
09/21/19 09:43 PM
|
Joined: Dec 2011
Posts: 10,416 MT
snowy
trapper
|
trapper
Joined: Dec 2011
Posts: 10,416
MT
|
I think I would UNINSTALL the printer and then REINSTALL it. Maybe you have tried that already. Do this ^
Give me a fish, I will eat for a day. Teach me to fish, I will eat for a lifetime
|
|
|
Re: Computer problems can't get fixed.
[Re: Actor]
#6622231
09/21/19 09:43 PM
09/21/19 09:43 PM
|
Joined: Oct 2015
Posts: 1,076 Maine
mainer
trapper
|
trapper
Joined: Oct 2015
Posts: 1,076
Maine
|
Could you tell us which printer you have, name and model number? For example, "HP Color LaserJet 2605"
"...in a very few days we succeeded in taking over one hundred beaver, the skins of which were worth ten dollars per pound." Jim Beckwourth (1856)
|
|
|
Re: Computer problems can't get fixed.
[Re: mainer]
#6622269
09/21/19 10:45 PM
09/21/19 10:45 PM
|
Joined: Sep 2008
Posts: 6,700 Newark, Ohio 83 years
Actor
OP
trapper
|
OP
trapper
Joined: Sep 2008
Posts: 6,700
Newark, Ohio 83 years
|
Could you tell us which printer you have, name and model number? For example, "HP Color LaserJet 2605" the new printer I just got is a Canon PIXMA TS9120 (All In One). Are you printing wireless, if so, try connecting a USB cable and see if it will print. You are supposed to be able to configure it for wireless or USB. I am NOT interested in using it wireless, and configured it according to directions, for USB only. I think I would UNINSTALL the printer and then REINSTALL it. Maybe you have tried that already. I have already did this several times... to no avail.Garry-
“Don't pick a fight with an old man. If he is too old to fight, he'll just kill you.”
Have been trapping 77 years…
|
|
|
Re: Computer problems can't get fixed.
[Re: 52Carl]
#6622285
09/21/19 11:22 PM
09/21/19 11:22 PM
|
Joined: May 2016
Posts: 3,539 Southern Illinois
Foxpaw
trapper
|
trapper
Joined: May 2016
Posts: 3,539
Southern Illinois
|
Might be a bad USB cable. That could be. Once I had a Pixma that I failed to get plugged in all the way and worked all day at tax time trying to get it to print, when I quit and unplugged it I seen it wasn't in all the way. You might try a different usb port on your puter sometimes they won't always make a good connection. And or get a different cable and try.
|
|
|
Re: Computer problems can't get fixed.
[Re: Actor]
#6622287
09/21/19 11:23 PM
09/21/19 11:23 PM
|
Joined: Sep 2008
Posts: 6,700 Newark, Ohio 83 years
Actor
OP
trapper
|
OP
trapper
Joined: Sep 2008
Posts: 6,700
Newark, Ohio 83 years
|
adam m ...It is brand new and just installed the cartridge's … 52Carl … It didn't come with a cable and I had to buy a new one … so I hope it is good. Garry-
“Don't pick a fight with an old man. If he is too old to fight, he'll just kill you.”
Have been trapping 77 years…
|
|
|
Re: Computer problems can't get fixed.
[Re: Actor]
#6622332
09/22/19 01:22 AM
09/22/19 01:22 AM
|
Joined: Oct 2015
Posts: 1,076 Maine
mainer
trapper
|
trapper
Joined: Oct 2015
Posts: 1,076
Maine
|
I still think it's related to the Win. 10 update. Try the following if you haven't already done so. Note: this is not necessarily the same as uninstalling your printer. 1. Press the Windows Key (key with windows icon) and the X key at the same time. 2. On the list that pops up, click on Device Manager. 3. In Device Manager you'll see another list; click on Print Queues to expand it. 4. Right click on the printer device - Canon PIXMA - and click on uninstall. Once you've uninstalled the printer driver, restart your computer and it should automatically install the generic printer driver. Note: make sure the printer in plugged into your computer and turned on. If that doesn't work.... Click on the following link to download the latest driver for your printer and save the exe file to your desktop or downloads folder. (I've already checked the file - win-ts9100-1_1-n_mcd.exe - and it's safe) http://pdisp01.c-wss.com/gdl/WWUFORedirectTarget.do?id=MDEwMDAwODgzODAy&cmp=ABR&lang=EN1. Right-click on the driver setup file (win-ts9100-1_1-n_mcd.exe) and select Properties. 2. Select Compatibility tab. 3. Check Run this program in Compatibility mode. 4. Let the driver install, and then see if the printer works by printing a test page.
Last edited by mainer; 09/22/19 01:30 AM.
"...in a very few days we succeeded in taking over one hundred beaver, the skins of which were worth ten dollars per pound." Jim Beckwourth (1856)
|
|
|
Re: Computer problems can't get fixed.
[Re: mainer]
#6622533
09/22/19 10:37 AM
09/22/19 10:37 AM
|
Joined: Sep 2008
Posts: 6,700 Newark, Ohio 83 years
Actor
OP
trapper
|
OP
trapper
Joined: Sep 2008
Posts: 6,700
Newark, Ohio 83 years
|
I still think it's related to the Win. 10 update. Try the following if you haven't already done so. Note: this is not necessarily the same as uninstalling your printer. 1. Press the Windows Key (key with windows icon) and the X key at the same time. 2. On the list that pops up, click on Device Manager. 3. In Device Manager you'll see another list; click on Print Queues to expand it. 4. Right click on the printer device - Canon PIXMA - and click on uninstall. Once you've uninstalled the printer driver, restart your computer and it should automatically install the generic printer driver. Note: make sure the printer in plugged into your computer and turned on. If that doesn't work.... Click on the following link to download the latest driver for your printer and save the exe file to your desktop or downloads folder. (I've already checked the file - win-ts9100-1_1-n_mcd.exe - and it's safe) http://pdisp01.c-wss.com/gdl/WWUFORedirectTarget.do?id=MDEwMDAwODgzODAy&cmp=ABR&lang=EN1. Right-click on the driver setup file (win-ts9100-1_1-n_mcd.exe) and select Properties. 2. Select Compatibility tab. 3. Check Run this program in Compatibility mode. 4. Let the driver install, and then see if the printer works by printing a test page. Didn't work … win 10 doesn't even show up on compatibility (See Below) I tried running 7, 8, 98, and XP (Ser. Pack 3) … they said THIS PROGRAM CANNOT BE USED WITH THE CURRANT OPERATING SYSTEM ……… I tried the other Uninstall and reinstall and the only thing I got different was small wind with a printer icon that Said, Device or printer (don't remember) NOT FUNCTIONING … that was new. What size of hammer would you suggest I use on it? Garry-
“Don't pick a fight with an old man. If he is too old to fight, he'll just kill you.”
Have been trapping 77 years…
|
|
|
Re: Computer problems can't get fixed.
[Re: Actor]
#6622548
09/22/19 11:05 AM
09/22/19 11:05 AM
|
Joined: Oct 2015
Posts: 1,076 Maine
mainer
trapper
|
trapper
Joined: Oct 2015
Posts: 1,076
Maine
|
Let's check to see if your Print Spooler is running in the Services.
1. Press the Windows Key and the X key. 2. Click on Computer Management. 3. In Computer Management click on Services and Applications to expand it. 4. Click on Services and scroll down the list to Print Spooler.
Under the Status column it should be Running and under the Startup Type it should be Automatic. Is that what you see?
"...in a very few days we succeeded in taking over one hundred beaver, the skins of which were worth ten dollars per pound." Jim Beckwourth (1856)
|
|
|
Re: Computer problems can't get fixed.
[Re: mainer]
#6622614
09/22/19 01:01 PM
09/22/19 01:01 PM
|
Joined: Sep 2008
Posts: 6,700 Newark, Ohio 83 years
Actor
OP
trapper
|
OP
trapper
Joined: Sep 2008
Posts: 6,700
Newark, Ohio 83 years
|
Let's check to see if your Print Spooler is running in the Services.
1. Press the Windows Key and the X key. 2. Click on Computer Management. 3. In Computer Management click on Services and Applications to expand it. 4. Click on Services and scroll down the list to Print Spooler.
Under the Status column it should be Running and under the Startup Type it should be Automatic. Is that what you see? When I click on Win X, the screen opens up, but when try and click on anything …. the screen goes away and nothing pops up. Before I was able to go into settings and do a search and found what I needed this time no luck. I completely uninstalled the whole program and started over and guess what happen …. NOT A (This word is unacceptable on Trapperman) THING!!! Then I did a follow-up and redid the drivers …. same results. Time to go get drunk. At least then I would have a good reason for a headache. Oh yes... when reinstalling I got what I have right from the beginning … when I get to the 3rd step it is apparently finished installing …. It ell me to do a test print, with a start button... you can sit a wait all day and nothing happens when you push the START button. You are close Adam about a third grader … except it is just some Chinaman. I used to be a technical writer and wrote instruction manuals. We had this old maid that was in her late 50s at the time, that I gave them too and if should understood and could perform the task, we knew we were in the right ball park. Garry-
“Don't pick a fight with an old man. If he is too old to fight, he'll just kill you.”
Have been trapping 77 years…
|
|
|
Re: Computer problems can't get fixed.
[Re: mainer]
#6622621
09/22/19 01:06 PM
09/22/19 01:06 PM
|
Joined: Sep 2008
Posts: 6,700 Newark, Ohio 83 years
Actor
OP
trapper
|
OP
trapper
Joined: Sep 2008
Posts: 6,700
Newark, Ohio 83 years
|
Let's check to see if your Print Spooler is running in the Services.
1. Press the Windows Key and the X key. 2. Click on Computer Management. 3. In Computer Management click on Services and Applications to expand it. 4. Click on Services and scroll down the list to Print Spooler.
Under the Status column it should be Running and under the Startup Type it should be Automatic. Is that what you see? Okay … I found it …. It is as you said it should be ….!!! Garry-
“Don't pick a fight with an old man. If he is too old to fight, he'll just kill you.”
Have been trapping 77 years…
|
|
|
Re: Computer problems can't get fixed.
[Re: jbyrd63]
#6622639
09/22/19 01:23 PM
09/22/19 01:23 PM
|
Joined: Sep 2008
Posts: 6,700 Newark, Ohio 83 years
Actor
OP
trapper
|
OP
trapper
Joined: Sep 2008
Posts: 6,700
Newark, Ohio 83 years
|
LOL last time RESTORE IT TO PREVIOUS DATE !!!!!!!!!!!!!!
Oh well I tried.
Or just (This word is unacceptable on Trapperman) can it and go to Walmart spend 250 and all is well You only have a TEN day period to go back to a previous version or so they say on their web site … Microsoft. I just spent $100, I didn't have to spend on this printer, when it probably wasn't the printer that was bad in the first … It is Microsoft screwing with everybody. Garry-
“Don't pick a fight with an old man. If he is too old to fight, he'll just kill you.”
Have been trapping 77 years…
|
|
|
|
|