The chain between the trap to a drag. Do I need to dip it or just leave it. I never ran any drags and that had me wondering. I did the trap and drag. Thanks

As long as it's clean I'd say you're good.

For coyotes or fox always descented mine.

I boiled mine to get the factory grease off, other than that they’re untreated. The whole de-scenting thing is way overplayed. If it’s shiny just kick some dirt over it

Boil mine. Don't know if it makes a difference but it's piece of mind.

... chain will last longer if you treat it with the trap

Dip mine in 50/50 rustolum and acetone . Cheap and effective

i dont do anything to mine except use it

...treating trap equipment is more about rust prevention than scent ... if you’re worried about scent and don’t care about rust weakening and eventually eating through all your chains and traps... just throw everything in a pig pile next to the firewood lol

^^^^^^^^^^^^^^^

Drag and Chain both Love using drags. Just make sure you drags around thick stuff. A coyote or cat gets in and open harrowed field it can go a long ways.

I spray paint mine and roll with them.

Thanks guys

Thanks guys

I think it also depends where you place/bury the drag. If directly under your(which is often easiest when trapping bare frozen ground)IMO descenting only helps.

I use slide wires for fox sometimes (11 ga wire) & never treat it. No problems. Always treat trap & chain as usual