We are looking at getting a wood stove for our home. Our home is roughly a 1000 square feet on the main floor and just single story. Searching on internet for a small wood stove brings up a lot of really small stoves but these are for tiny homes or very small spaces. One stove I have my eyes on is a Lopi answer nexgen Fyre. This stove can be kept closer to the wall and is about 16” in depth. Anyone have experience with this stove or a similar sized stove?

Be careful when buying a stove that's rated for a certain square footage. Most of them are so small you need to feed it toothpicks....and often. My woodstove is way over rated for my house, BUT the firebox is big enough to put normal sized logs in. I just don't fill it up, but I can if I want extended burn time. Burn time is regulated (mostly) with the airflow that you adjust.

To some degree, you get what you pay for in the woodstoves. If I remember right, the 3 sides of mine can be within an inch or two of the wall.

I have both the Quadrafire 4300 steptop (in the house) and the Drolett Austrial in the shop. They make a smaller Quadrafire unit as well. Probably lots of great models out there, though.

You won't regret a woodstove. I won't own a house without one again.

I recommend calling your insurance company and see if they will still cover you if you have a stove installed. Some do, some don't. The ones that do cover wood stoves usually require the stove and chimney be installed by professional and stove has a UL listing.

That said, you can’t beat wood heat!

Before you bring it inside do the first couple burns outdoors to burn off the chemicals. Personally ide go bigger than 16" Firebox but I don't know your size limitations

Will throw this out for consideration, as 99% of the world is not aware they exist......the Liberator..

https://rocketheater.com/

Will burn real wood in addition to pellets, and they burn, clean, hot (2,000F+) and fast. Best use is take stove as shown, then run exhaust threw a secondary storage structure, like a brick cube about the size of a washing machine, then up and out normal vent stack. Bricks absorb the surplus heat and cool down the exhaust even more. Bricks then radiate heat into room all day.

Get Yourself a baby bear or mamma bear fisher wood stove.
Tried 2 other brands and they didn’t come close.

There is no way a stove mfg can provide an accurate estimate of the number of sq ft a stove can heat. They don't know anything about your heat load, which is determined by factors such as outside temps, insulation, windows, ceiling height, etc. Instead, look at heat output in Btu's and compare it with your current system. Then consider that the stove output is probably at max burn rate and you won't have it burning at that rate much of the time.

Cast iron stoves are generally better than plate steel because the cast iron absorbs heat and then gives it off providing a more even heat to the house. Soapstone stoves are even better in that regard but also more expensive. The only downside is that both take longer to heat up than a steel stove.

The Lopi stove I mentioned in my first post I just called about and is 2600 dollars.

Not sure the part of Illinois you live but in west central you are close to a dealer that has been in the business for a long time. They are located in West Point Iowa. Wood Stoves

Good point. Your insurance company will require it inspected. For me it was inspected by the city, then signed off by the insurance company. My rates went up $20 a year doing it that way. Don't do that and have a fire and that's the insurance company's way out from paying you a dime.

Don’t get me started on insurance companies lol. Thanks for the info everyone. I will check that place out drifter, I’m from Erie. I looked up the baby bear models and said made by fisher but couldn’t find a direct website to them.

Have you considered a wood pellet stove instead?

do things properly and safely.

Your still buying fuel of sorts to heat your house. Yes you have other investments with a standard wood stove but I would rather be out in the woods cutting wood than standing in line at the big box store buying pellets.

My son has one and not really impressed with it. They like it and works good for them but a wood stove would be more for me. I had a wood stove in a house I used to have and loved everything about it even the cutting and splitting of wood I always enjoyed.

Fisher wood stoves are no longer made but if you can find one, they are a good stove.
Probably not uL rated.

That explains why I can’t find anything other than used ones lol. Vermont castings has a model aspen C3 that’s also caught my attention.

I have a 1200 square foot house and I run a big napoleon stove. The house is brand new this last year and it's ICF so very efficient. The stove will cook you out of it.
BUT the size of the stove doesn't matter. The size of the fire inside it matters. Run a small fire. That's all I do

rusty the guy that built that house must really suck. shoulda made it alot more drafty. icf is a rip off 2x4 walls with r10 paper backed insulation is the way to go. lol

Yeah. Not sure if i buy the ICF crap either.
The building inspector showed me he put all the trusses on backwards too. That made me upset.