|
Scope/ Mount Question
#7923208
08/08/23 01:18 AM
08/08/23 01:18 AM
|
Joined: Jan 2008
Thailand
yukonjeff
OP
trapper
|
OP
trapper
Joined: Jan 2008
Thailand
|
I dropped this gun and it hit hard, bumped the scope a couple of years ago. I sighted it back in and then a year later I fell with it and hit hard and knocked out of whack again. I tried sighting it back in but now its cranked all the way to the left but still shooting a foot to the right at about 25 yards. Any quick fixes ? Mounts ? Scope ? Thanks ![[Linked Image]](https://i.imgur.com/mDvmjS2.jpg)
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923209
08/08/23 01:24 AM
08/08/23 01:24 AM
|
Joined: Oct 2015
Fingerlakes New York
robert.d12
trapper
|
trapper
Joined: Oct 2015
Fingerlakes New York
|
Seems something is bent, I’d think you’d be able to tell by looking at it. Is the objective end of that scope bent down or is it just how it looks in the picture? What’s the brand of the scope?
The beauty of the second amendment is it wont be needed until they try to take it. -Thomas Jefferson
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923215
08/08/23 02:27 AM
08/08/23 02:27 AM
|
Joined: Dec 2006
Coeur d' Alene, Idaho
James
"Minka"
|
"Minka"
Joined: Dec 2006
Coeur d' Alene, Idaho
|
Sounds like something broken in the reticle, a reticle adjustment spring maybe, if the scope has such a thing. Not meaning to give offense, but the Cabela's Pine Ridge are low-end scopes, if I recall right. The optics are fair for the price, but I don't know about the mechanics. Any chance it's still under warranty? If not, Cabela's may repair or replace it at a discount for you. If you'd bought a Leupold, they'd replace it free.  Jim
Last edited by James; 08/08/23 02:28 AM.
Forum Infidel since 2001
"And that troll bs is something triggered snowflakes say when they dont like what someone posts." - Boco
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923219
08/08/23 03:02 AM
08/08/23 03:02 AM
|
Joined: Jan 2008
Thailand
yukonjeff
OP
trapper
|
OP
trapper
Joined: Jan 2008
Thailand
|
I bought the gun used with the scope set up already. I would not have put that one on its big and bulky but been good optics up until I abused it. I might of bent it. It hit pretty hard. It dont take much to throw it off. Might not be noticeable with the naked eye. But good idea I wonder if Cabela's would fix/replace it, probably not, since its second hand. Maybe I will give it a smack in the other direction with a rubber mallet 
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923301
08/08/23 07:16 AM
08/08/23 07:16 AM
|
Joined: Mar 2007
Central MN, sort of old
MnMan
trapper
|
trapper
Joined: Mar 2007
Central MN, sort of old
|
Those Ruger rings with the integral bases seem like a pretty bulletproof setup to me so I would suspect the scope first. If you have another scope, I would try putting it on and see where it goes from there. Did you try loosening the mount and ring screws and retightening them just in case they were loose in the first place and got misaligned?
I'm just happy to be here! Today I'm as young as I'll ever be and and older than I've ever been before!
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923368
08/08/23 09:01 AM
08/08/23 09:01 AM
|
Joined: Sep 2013
Green County Wisconsin
GREENCOUNTYPETE
trapper
|
trapper
Joined: Sep 2013
Green County Wisconsin
|
I would take this as the opportunity to put the scope that better fits your needs likely a broken scope
and maybe also replace the rings.
America only has one issue, we have a Responsibility crisis and everything else stems from it.
|
|
|
Re: Scope/ Mount Question
[Re: Rat Masterson]
#7923374
08/08/23 09:24 AM
08/08/23 09:24 AM
|
Joined: Jan 2019
Northern IN USA
Flipper 56
trapper
|
trapper
Joined: Jan 2019
Northern IN USA
|
X2 must have landed on the eyepiece, looks bent down. New scope!
"Where Can A Man Find Bear Beaver And Other Critters Worth Cash Money When Skinned?"
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923759
08/08/23 07:10 PM
08/08/23 07:10 PM
|
Joined: Dec 2006
Coeur d' Alene, Idaho
James
"Minka"
|
"Minka"
Joined: Dec 2006
Coeur d' Alene, Idaho
|
Leupold will supposedly replace or fix even a second-hand scope. I can't vouch for their warranty service, as I've never had one of my seven or eight Leupolds fail.
If I were replacing a scope today, I'd get a 30 mm. They cost more, and you have to get new rings, but they give you a great expansive view. After looking through a 30 mm for a while, a one-inch scope is like seeing through a soda straw.
Jim
Forum Infidel since 2001
"And that troll bs is something triggered snowflakes say when they dont like what someone posts." - Boco
|
|
|
Re: Scope/ Mount Question
[Re: sako22]
#7923833
08/08/23 09:06 PM
08/08/23 09:06 PM
|
Joined: Oct 2009
western mn
bucksnbears
trapper
|
trapper
Joined: Oct 2009
western mn
|
just saw new burris fullfield II 4.5x14x42 scopes on ebay for $101.99. They are very good scopes for the money. I have 4 now and might order a couple more for that price No, they are not. They are just " ok" scopes. 101 00$ ain't gonna buy a good scope.!! Thar pic looks like the scope is bent? Not a company's responsibility to replace if you fell and bent it. Man up and buy a new one.
swampgas chili and schmidt beer makes for a deadly combo
You have to remember that 1 out of 3 Democratic Voters is just as dumb as the other two.
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923880
08/08/23 10:19 PM
08/08/23 10:19 PM
|
Joined: Dec 2006
Mt.
g smith
trapper
|
trapper
Joined: Dec 2006
Mt.
|
Jeff you are a old hand up there and your moose are a big target so just sneakum up close and that scope and rifle will do just fine .!
You can ride a fast horse slow but you can't ride a slow horse fast .
|
|
|
Re: Scope/ Mount Question
[Re: MnMan]
#7923908
08/08/23 11:44 PM
08/08/23 11:44 PM
|
Joined: Jan 2008
Thailand
yukonjeff
OP
trapper
|
OP
trapper
Joined: Jan 2008
Thailand
|
Those Ruger rings with the integral bases seem like a pretty bulletproof setup to me so I would suspect the scope first. If you have another scope, I would try putting it on and see where it goes from there. Did you try loosening the mount and ring screws and retightening them just in case they were loose in the first place and got misaligned? When I went to remove the base mounts, the screws were a bit loose. The gun kicks like a mule might of shook loose. I tightened up the screws and backed off the Right side I maxed out and will try it again and see if I can get it sighted in before I run out of shells. I have one box left. Your Right G Smith, a foot really don't really matter on a moose up close  I have a 30-06 with a really old K-4 Weaver on with see through mounts. its been on for 40 years and I never had to resight it. I have a 222 and 223 both have Leupold's and both have been great scopes as well. Thanks for the suggestions, everyone.
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923920
08/09/23 12:38 AM
08/09/23 12:38 AM
|
Joined: Jul 2012
N. Carolina
Scout1
trapper
|
trapper
Joined: Jul 2012
N. Carolina
|
If it groups fine I would try to shim it off the opposite way that it is cranked way up? If that makes sense.
------------------------------------- Paying Top Dollar for Alien Parts.
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7923923
08/09/23 01:02 AM
08/09/23 01:02 AM
|
Joined: Dec 2006
Coeur d' Alene, Idaho
James
"Minka"
|
"Minka"
Joined: Dec 2006
Coeur d' Alene, Idaho
|
If the screws were loose, that could explain the whole problem right there.
Jim
Forum Infidel since 2001
"And that troll bs is something triggered snowflakes say when they dont like what someone posts." - Boco
|
|
|
Re: Scope/ Mount Question
[Re: yukonjeff]
#7924094
08/09/23 09:20 AM
08/09/23 09:20 AM
|
Joined: Aug 2011
james bay frontierOnt.
Boco
trapper
|
trapper
Joined: Aug 2011
james bay frontierOnt.
|
Myself,I wouls switch the sope with another gun,then you will know if it the scope or mount/rifle Boresighting by eye, like said above,at 25 yards will save you some ammo.
Last edited by Boco; 08/09/23 09:21 AM.
Forget that fear of gravity-get a little savagery in your life.
|
|
|
|
|