Who is running (or ran) a hitch mounted skinning machine rig for coyotes? Pics, Videos, discussion?

I have a skinning machine with an electric winch in the shop I bought from ADC a number of years ago.. Making a road trip this fall and looking for portable options you all have used successfully.

thx
LH

Heres a pic of one i built for when i trap out of state,
Hand winch and parts from a treadmill and some welding ,
the receiver is pinned to the upright so i can take it apart easily for stowing .

that looks like your still pulling by hand?

I has one but I had to use the steel from it.

Danny ,
Skin out the back legs and tail , c!amp the skirt and tail to the Skinning rig and winch up to the neck ,head . Easy peasy

clamp it where?

Danny take two vise grips and clamp to the bottom of the skinning rig _the white part in the pic_ that is angle iron, hard to see in pic .

IC now. I need to do something like that with this one before I get loose pulling one by hand and break my ankle/leg again. All healed up now and no problems. Dont want to repeat it. Took awhile to heal back up.



(crown royal bottle has cat pee in it)

Appreciated gents. I’ll stop by the weld shop and have them rig something up.

Some of the several I've made. Shoot me a PM Larry if you want other ideas or info.

Jayme

Thanks Jayme. Looks like what I need. You ever rig one up on a UTV? I’m thinking of running my Honda a good bit out yonder vs the truck.

I made one with a plate on the bottom that you can park your truck or UTV on the plate to hold it solid. I can't find a picture but as I recall the plate was about 8" wide and 15-16" long, with the upright welded to one end. I'm sure you can picture it.