MTP on 3/8"rod - Trapperman Forums

No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter

Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting~The Pen and Quill

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum~ Fermenter's Forum

~~~ Dobbins' Products Catalog ~~~

Minnesota Trapline Products

Please support our sponsor for the Trappers Talk Page - Minnesota Trapline Products

Register Log In Home Forums Trapper Talk MTP on 3/8"rod

Print Thread

Hop To

MTP on 3/8"rod #8313261 01/15/25 02:45 PM 01/15/25 02:45 PM
Joined: Apr 2012 new york M mike mason OP trapper
mike mason OP trapper M Joined: Apr 2012 new york	Any ideas on mounting MTP conibear holders on 3/8" rod? Tried welding a 7/16" nut to the back. Alot of work.

Re: MTP on 3/8"rod [Re: mike mason] #8313274 01/15/25 02:52 PM 01/15/25 02:52 PM
Joined: Aug 2012 South Dakota R Rat Masterson trapper
Rat Masterson trapper R Joined: Aug 2012 South Dakota	If your talking about the brackets, drill out the center hole to fit rod, slide down an inch or so( that way you can pound them in) and weld.

Re: MTP on 3/8"rod [Re: Rat Masterson] #8313282 01/15/25 03:02 PM 01/15/25 03:02 PM
Joined: Apr 2012 new york M mike mason OP trapper
mike mason OP trapper M Joined: Apr 2012 new york	Originally Posted by Rat Masterson If your talking about the brackets, drill out the center hole to fit rod, slide down an inch or so( that way you can pound them in) and weld. Not clear on your explanation. What I'm I welding?

Re: MTP on 3/8"rod [Re: mike mason] #8313305 01/15/25 03:48 PM 01/15/25 03:48 PM
Joined: Jun 2010 Iowa ~ADC~ The Count
~ADC~ The Count Joined: Jun 2010 Iowa	Originally Posted by mike mason Originally Posted by Rat Masterson If your talking about the brackets, drill out the center hole to fit rod, slide down an inch or so( that way you can pound them in) and weld. Not clear on your explanation. What I'm I welding? Stick the rod through the hole and weld around the rod on top of the bracket. Same as welding a washer on top of a trap stake. www.iowatrapperstalk.com

Re: MTP on 3/8"rod [Re: mike mason] #8313359 01/15/25 05:01 PM 01/15/25 05:01 PM
Joined: Aug 2012 South Dakota R Rat Masterson trapper
Rat Masterson trapper R Joined: Aug 2012 South Dakota	That's it, thanks ADC. When I ran alot of 220s this was my setup, trap holder and stake all in one. I could usually push them in by hand, if that is your plan I also welded a big washer down the stake to keep the setup from spinning.

Re: MTP on 3/8"rod [Re: mike mason] #8313375 01/15/25 05:23 PM 01/15/25 05:23 PM
Joined: Apr 2012 new york M mike mason OP trapper
mike mason OP trapper M Joined: Apr 2012 new york	Got it! Thanks

Moderated by 330-Trapper, Bogmaster, Cindy, cotton, Drifter, Maddog47, Paul Dobbins, Sharon, USMC47 🦫, Wolfdog91

Powered by UBB.threads™ PHP Forum Software 7.7.1