Got the forms all made for the footers.Down to bed rock.This week got to order the concrete and mix with a wheel barrow.

What are the measurements (length an width)? Keep us posted as you progress

Thought u were moving to Arizona or was that for pretend

No footings?

It only needs to last as long as Bruce Does.

I'd at least remove the grass!

Looks like there will be footing to me.

Keep us posted and updated on the project Bruce.

Good deal, if ya can, bum or rent a mixer. I just poured 30 80# sacks & if not for the mixer I borrowed would've been a killer. Keep updating w/ pics, any heat or plumbing?

24x24

Footing and 8 inch wall will be poured at same time

Old school.....nice

Just found it it was much cheaper to have it poured then buy the bags and mix it myself

That will be my winter home

Are you using native rough cut for your lumber?

Yes

Can’t be, the excavation would need to be a larger foot print.

Don’t see any re rod either…?

Are them round things siting on the top soil?

18” to 24”,,,, two runs of bar and uprights l hooked into foot is correct… then two bars tied to them……
that looks like a china build.

Don't need re-rod for a footer.Was cheaper for me to have everything poured togather so I'm now going to also have the porch concrete slab poured at the same time.Going to use metal cattle panels inside of the porch pad instead of re-rod.Got to also get that ready now and have the concrete sceduled to be delivered on the 17th of June.

Yes , only example of a footing and stem I could find