I decided I needed get the fur boards stored somewhere other than leaning in one area or another, needing to be moved when I needed to to whatever they were leaning on. I welded up some hangers to go above the garage door. I need to build one more set for my coon boards.

Great idea!

X2. Now I need to make on.

I have 12’ ceilings so I have use a ladder to get them down

Good thinking. That gives me an idea for storing mine also.

Stuck mine between the floor joists in the basement with some 1x2's nailed across..

I did the same thing years ago. It works well!

Stuck some boards across between the trusses on the shop and store mine up there. Twelve foot walls, so I'm in the same boat as you, need a ladder to get them down.

I like the ceiling fan too! The filters around work pretty good!

Yes it does work well. That’s a melding of a couple versions I found on YouTube. Mine has five MERV 13 filters and the fan draws the air in and pushed it out through the filters. I’ve seen it done where they set the fan up to draw in through the filters but they seem to not be as effective. I just put it in. My plan is to rewire it so the speed control switch is on the wall and the unit is hard wired into the breaker panel.

Those are some nice looking stretchers. Make them yourself or store bought?