No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting~The Pen and Quill

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum~ Fermenter's Forum


~~~ Dobbins' Products Catalog ~~~


Minnesota Trapline Products
Please support our sponsor for the Trappers Talk Page - Minnesota Trapline Products


Print Thread
Hop To
Changing Delta shower cartridge #8666372
09/24/26 08:13 PM
09/24/26 08:13 PM
Joined: Sep 2008
NC
B
bowhunter27295 Offline OP
trapper
bowhunter27295  Offline OP
trapper
B

Joined: Sep 2008
NC
I have a decent leak in my shower. I need to change out the cartridge to stop the leak.

Problem is I cannot break the set screw. It is an Allen head screw and I have tried several times. I have put decent pressure on it. I have sprayed anti seize. I have tapped the Allen head wrench with a hammer for several minutes with pressure. If I could break that set screw I could change it out easy peezy.

I have thought about cutting the entire handle off. I have thought about cutting just the handle lever off and drilling out the set screw. I just can't get it to break.

Any of you plumbers or DIY guys have any suggestions? I worked on that thing off and on one day for probably three hours. Just trying to be careful with the pressure and not strip out the Allen head.

Have any of you actually don this?

Help? And thanks.


How many lies will people believe before they realize their own idiocy?
Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666376
09/24/26 08:21 PM
09/24/26 08:21 PM
Joined: Jan 2014
NW MO
T
TurkeyTime Offline
trapper
TurkeyTime  Offline
trapper
T

Joined: Jan 2014
NW MO
Will be soon and my plan is to just replace the whole thing.

Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666379
09/24/26 08:29 PM
09/24/26 08:29 PM
Joined: Nov 2007
St. Cloud, MN
trapperkeck Offline
trapper
trapperkeck  Offline
trapper

Joined: Nov 2007
St. Cloud, MN
This is where I'm at with my shower. If it helps. LOL
[Linked Image]


"The voice of reason!"
Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666409
09/24/26 08:57 PM
09/24/26 08:57 PM
Joined: Jan 2007
Georgia
warrior Offline
trapper
warrior  Offline
trapper

Joined: Jan 2007
Georgia
Heat? But it's probably a plastic cartridge with o rings.


[Linked Image]
Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666420
09/24/26 09:22 PM
09/24/26 09:22 PM
Joined: Dec 2006
iowa
T
trappinia Offline
trapper
trappinia  Offline
trapper
T

Joined: Dec 2006
iowa
You could try putting CLR or another descaling ajent on it .

Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666441
09/24/26 09:49 PM
09/24/26 09:49 PM
Joined: Dec 2010
Armpit, ak
D
Dirt Offline
trapper
Dirt  Offline
trapper
D

Joined: Dec 2010
Armpit, ak
If there is clearance use a socket allen with a ratchet. If you are using a socket allen ignore this. Could try whacking the ratchet like an impact screwdriver with a hammer when you torque.

Last edited by Dirt; 09/24/26 09:52 PM.

Who is John Galt?
Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666482
09/25/26 01:19 AM
09/25/26 01:19 AM
Joined: Dec 2007
barton county kansas
Sasquatch91 Offline
trapper
Sasquatch91  Offline
trapper

Joined: Dec 2007
barton county kansas
Little heat should work. If you have to heat up your allen wrench, stick it into the screw. May have to do this a few times.


"You skin that one pilgrim."



Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666584
09/25/26 09:02 AM
09/25/26 09:02 AM
Joined: Feb 2020
Indiana
P
Providence Farm Offline
trapper
Providence Farm  Offline
trapper
P

Joined: Feb 2020
Indiana
Allen head socket on an impact driver . My shower just started dripping and im heading to the store to get parts today or tomorrow. I put this one in 8 to 10 years ago. Its a peerless so like a delta I may be able to just replace some o rings and springs.

When looking it over I was cuss I f myself for not puting shut off valves when I installed it. I always add shut offs if there are not any. Infact im going to go look lower into the wall.

Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666586
09/25/26 09:14 AM
09/25/26 09:14 AM
Joined: Sep 2013
Green County Wisconsin
G
GREENCOUNTYPETE Offline
trapper
GREENCOUNTYPETE  Offline
trapper
G

Joined: Sep 2013
Green County Wisconsin
the 1/4 inch impact has helped me on some of these , the twisting is minimal but the hammering seems to work with minimal twisting

the 1/2 inch impact would be far too much and break it.


America only has one issue, we have a Responsibility crisis and everything else stems from it.
Re: Changing Delta shower cartridge [Re: GREENCOUNTYPETE] #8666589
09/25/26 09:17 AM
09/25/26 09:17 AM
Joined: Feb 2020
Indiana
P
Providence Farm Offline
trapper
Providence Farm  Offline
trapper
P

Joined: Feb 2020
Indiana
Originally Posted by GREENCOUNTYPETE
the 1/4 inch impact has helped me on some of these , the twisting is minimal but the hammering seems to work with minimal twisting

the 1/2 inch impact would be far too much and break it.


Not sure what the one i was referring to is I think1/4. The kind screw driver bits slide right into and lock in place with ring you pull to remove them. Also has 3 different power settings. To avoid over doing it.

Yes my half inch would twist it in half.
These
[Linked Image]
[Linked Image]

Last edited by Providence Farm; 09/25/26 09:23 AM.
Re: Changing Delta shower cartridge [Re: Providence Farm] #8666609
09/25/26 10:03 AM
09/25/26 10:03 AM
Joined: Sep 2013
Green County Wisconsin
G
GREENCOUNTYPETE Offline
trapper
GREENCOUNTYPETE  Offline
trapper
G

Joined: Sep 2013
Green County Wisconsin
Originally Posted by Providence Farm
Originally Posted by GREENCOUNTYPETE
the 1/4 inch impact has helped me on some of these , the twisting is minimal but the hammering seems to work with minimal twisting

the 1/2 inch impact would be far too much and break it.


Not sure what the one i was referring to is I think1/4. The kind screw driver bits slide right into and lock in place with ring you pull to remove them. Also has 3 different power settings. To avoid over doing it.

Yes my half inch would twist it in half.
These
[Linked Image]
[Linked Image]

yup 1/4 inch hex impact driver with the 1/4 inch drive socket adapter unless you have the hex bits for the 1/4 inch hex drive


America only has one issue, we have a Responsibility crisis and everything else stems from it.
Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666619
09/25/26 10:33 AM
09/25/26 10:33 AM
Joined: Feb 2014
Ky
J
jbyrd63 Offline
trapper
jbyrd63  Offline
trapper
J

Joined: Feb 2014
Ky
How old is your shower? You say set screw is it what is holding on the handle? Most dont have a set screw just a collar that holds the cartridge in. BUT if it's on the e handle get you a 8 inch piece of pipe and use as a cheater bar. If correct size it will pop loose.

Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666746
09/25/26 04:21 PM
09/25/26 04:21 PM
Joined: Dec 2007
barton county kansas
Sasquatch91 Offline
trapper
Sasquatch91  Offline
trapper

Joined: Dec 2007
barton county kansas
My makita impact driver like that dewalt will take lugnuts off.


"You skin that one pilgrim."



Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666762
09/25/26 05:01 PM
09/25/26 05:01 PM
Joined: Dec 2009
The Hill Country of Texas
Leftlane Offline
"HOSS"
Leftlane  Offline
"HOSS"

Joined: Dec 2009
The Hill Country of Texas
I had no idea a shower had a cartridge what does it do?


What"s good for me may not be good for the weak minded.
Captain Gus McCrae- Texas Rangers


Re: Changing Delta shower cartridge [Re: Leftlane] #8666765
09/25/26 05:04 PM
09/25/26 05:04 PM
Joined: May 2010
The great cage state Colorado
M
Monster Toms Offline
trapper
Monster Toms  Offline
trapper
M

Joined: May 2010
The great cage state Colorado
Originally Posted by Leftlane
I had no idea a shower had a cartridge what does it do?


So you can replace the cartridge instead of the whole faucet when the seals go bad.






Re: Changing Delta shower cartridge [Re: bowhunter27295] #8666767
09/25/26 05:06 PM
09/25/26 05:06 PM
Joined: Dec 2009
The Hill Country of Texas
Leftlane Offline
"HOSS"
Leftlane  Offline
"HOSS"

Joined: Dec 2009
The Hill Country of Texas
My shower is way too old for all that. Thanks for helpin me understand.


What"s good for me may not be good for the weak minded.
Captain Gus McCrae- Texas Rangers


Re: Changing Delta shower cartridge [Re: Leftlane] #8666773
09/25/26 05:20 PM
09/25/26 05:20 PM
Joined: Feb 2020
Indiana
P
Providence Farm Offline
trapper
Providence Farm  Offline
trapper
P

Joined: Feb 2020
Indiana
Originally Posted by Leftlane
My shower is way too old for all that. Thanks for helpin me understand.



Delta make the easiest to replace and get new parts for if you ever need to put new ones in. Box store have delta parts. A good % of other brands you replace them not fix them.

Previous Thread
Index
Next Thread